Loading ...
Loading ...
Loading ...
REPAIR AND ADJUSTMENT
SCRE
WIRE
CONNECTION
16. Fuse Replacement
Replace with 30 amp automotive -type plug-in fuse.
17. Hood Removal
a. To raise hood, lift at rear of hood.
b. To remove hood, grill and side panels, raise hood
and loosen one screw on each side paneL (This
screw remains in the side panel) (Fig, 23).
c. Unsnap headlight connection (Fig, 24).
FIGURE 23
d
e,
Stand in front of tractor. Grasp hood and tlltforward
and lift off (Fig. 24).
To rainstall, reverse above procedure.
18. Mower Removal
a. Remove mower belt per instructions under "Mower
Drive Belt Removal" through step(c).
b. Puff retainer springs out of rear suspension trur,-
nions. Remove roar suspensions trunnions from lift
brackets (Fig. 25).
\c, Pull retainer spring out of tear hinge pin, Remove
rear hinge pin. (Fig° 25)
d, Pull rotainer spring out of front hinge pin. Remove
front hinge pin (Fig.25)_
e. Use lift lever to raise suspension arms. Slide mower
out from under tractor°
FIGURE 24
R.H.
SUSPENSION
ARM
RETAINER
SPR INGS
NOTE: IF AN ATTACHMENT OTHER THAN THE MOWER
DECK IS TO BE MOUNTED ON THE TRACTOR,
THE LH. AND R.H. SUSPENSION ARMS (FIG. 25)
SHOULD BE REMOVED FROM TRACTOR.
TRUNNION
/_ LIFT
BRACKET/
/HINGE
PINS
RGURE 25
20
Loading ...
Loading ...
Loading ...