Loading ...
Loading ...
Preparing your garage door
Before you begin:
o Disable locks
o Remove any ropes connected to garage door.
- Complete the following test to make sure your garage
door is balanced and is not sticking or binding:
1 Lift the door about halfway as shown Release the
door. if balanced, it should stay in place, supported
entirely by its springs
2 Raise and lower the door to see if there is any
binding or sticking
If your door binds, sticks, or is out of balance, call a
trained door systems technician
To preventpossibleSERIOUSINJURYor DEATH:
- ALWAYSca!la trained door systemstechnicianif garage
door binds,sticks, or is out of balance An unbalanced
garagedoor maynot reversewhen required
o NEVERtry to loosen,moveor adjustgarage door, door
springs, cables,pulleys,bracketsor their hardware,a!; of
which areunder EXTREMEtension
° DisableALL locks and removeALL ropes connectedto
garagedoor BEFOREinstallingand operatinggaragedoor
openerto avoid entanglement.
To preventdamageto garagedoor and opener:
• ALWAYSdisablelocks BEFOREinstallingand operating
the opener
• ONLYoperategaragedoor openerat !20V, 60 Hzto avoid
malfunctionanddamage
Sectional Door
One-Piece Door
Tools needed
During assembly, installation and adjustment of the opener,
instructions will call for hand tools as illustrated below
Step Ladder
Level (optional) _ Penc_f
Tape Measure
Wire Cutters
Drill 3/16', 5ft 6"
_,_ and 5/32"
and 1/4"
Hack Saw
Screwdriver
Adjustable End Wrench
Loading ...
Loading ...
Loading ...