Loading ...
Loading ...
Loading ...
PRODUCT ASSEMBLY PRODUCT ASSEMBLY
SAFETY FEATURES
TROUBLE SHOOTING TIPS
If your heater shuts off unexpectedly or fails to operate, one of the
above-mentioned safety features may have activated to prevent overheating.
1.Be sure the power cord is plugged into a working electrical outlet.
2.Check your thermostat setting. The heater may be off because it has reached
the desired temperature setting.
MAINTENANCE
WARNING: ALWAYS UNPLUG THE CORD BEFORE MOVING OR
SERVICING. DO NOT IMMERSE HEATER IN WATER!
WARNING: In case of malfunction or doubt, do not try to repair the radiator
yourself .It may result in a fire hazard or electric shock.
CLEANING: IMPORTANT! DO NOT IMMERSE HEATER IN WATER! Clear
the heater grills with the vacuum brush attachment on your vacuum cleaner. This
will r
emove lint and dirt from the inside of the heater. DO NOT ATTEMPT TO
TAKE HEATER APART. Clean the body of heater with a soft cloth.
CAUTION: Do not use gasoline, benzine, thinner, harsh cleaners, etc. as they
will damage the heater. NEVER USE ALCOHOL OR SOLVENTS.
STORAGE: wind the cable round the bobbin, and then store the heater with these
instructions in the original carton in a cool, dry place.
This product has protection safeguards that shut off the product when parts become
excessively hot or if it tips over. If the product shuts off, immediately turn the
Control to the "OFF" position and unplug it from the electric outlet.
If tipped over:
Place the product on a flat, level, stable surface in order to prevent the product from
tipping ove
r again.
TIP: Always install and maintain at least one smoke detector in good operating
condition on each floor of your home. Periodically check and/or replace the
battery in your smoke detector with a new battery.
08 09
Loading ...