Loading ...
Loading ...
Loading ...
MAVO Edge 8K Operation Manual (KineOS 7.0)
©2021 Kinefinity Inc. Page 47 / 61
4.2.3 LENS
The control port (LENS) is located at the front of the camera
body, a 0B 6-pin push-pull socket.
Pin 1: Record on/off input signal, input voltage up to
3.3V.
Pin 3 and pin 4: standard voltage of RS232 connector
(-15V~+15V).
Pin 6: VBAT output is equal to camera body power
input (voltage as 11V~26V), max current up to 3A.。
NOTICE The VBAT is only available on compatible accessories. Please confirm with Kinefinity when you
use this port or customize third-party accessories.
NOTICE The input voltage of RS connector cannot exceed 3.3V. Otherwise the camera will be damaged
and sent to the factory.
4.2.4 SYNC
SYNC is a 0B7-pin push-pull socket on MAVO Edge 8K.
Pin 1 and Pin 7: Voltage range, 0~3.3V.
Pin 2 and Pin 3: standard voltage of RS232 connector, -
15V~+15V.
Pin 5: Voltage output range, 0~3.3V.
提示 The VBAT is only available on compatible accessories.
Please confirm with Kinefinity when you use this port or
customize third-party accessories.
#
Definition
1
RS
2
DET
3
RS232 TX
4
RS232 RX
5
GND
6
VBAT
#
Definition
1
CAN_L
2
RS232_RX
3
RS232_TX
4
Reserved
5
TALLY
6
GND
7
CAN_H
Loading ...
Loading ...
Loading ...