Loading ...
Loading ...
Loading ...
EN - 16 WWW.SENIXTOOLS.COM
TROUBLESHOOTING
6XVSHFWHGPDOIXQFWLRQVDUHRIWHQGXHWRFDXVHVWKDWWKHXVHUVFDQ¿[WKHPVHOYHV7KHUHIRUHFKHFNWKHSURGXFWXVLQJWKLV
section. In most cases the problem can be solved quickly.
PROBLEM POSSIBLE CAUSE SOLUTION
Product does not start
Battery pack not properly
attached
Attach properly
Battery too hot/cold Allow to cool/warm
Battery pack discharged Charge the battery pack
Product does not cut
Cutting line too short/broken off Manually feed cutting line
Spool empty Replace line spool
Cutting line can no longer
be fed
Line inside the spool entangled Inspect the spool, rewind if necessary
Spool empty 5H¿OOOLQHVSRRO
Cutting line breaks frequently
Line inside the spool entangled Remove spool – rewind line
Trimmer used incorrectly
Only trim with the tip of the line, avoid stones,
walls and other hard objects. Feed the line
regularly to maintain full cutting diameter.
Heavy vibrations
Cutting line broken Pull out cutting line with manual feed
Cutting system damaged
+DYHWKHSURGXFWUHSDLUHGE\DTXDOL¿HG
service.
Grass between spool housing and
line-feed button
Disassemble spool cover and remove grass
Grass in hole for line feed Remove grass from hole for line feed
Loading ...
Loading ...
Loading ...