Loading ...
Loading ...
Loading ...
Your new tractor has been assembled at the factory with the exception of those parts left
unassembled for shipping purposes,
TOOLS REQUIRED FOR
ASSEMBLY
A socket wrench set will make assembly
easier. Standard wrench sizes you need
are listed below,
(1) 3/4"wrench (1) Pliers
(1) 9/16" wrench (1) Utility knife
(1) Tire pressure gauge
ADJUST SEAT
1. Sit in seat.
2, Lift up adjustment lever (A) and slide seat
until a comfortable position is reached
which allows you to press c_utch/brake
pedal all the way down_
3_ Release lever to lock seat in position,
When right or left hand is mentioned in this
manual, it means, from your point of view,
when you are in the operating position (seat-
ed behind the steering whee!).
TO REMOVE TRACTOR FROM
CARTON
UNPACK CARTON
1, Remove all accessible loose parts and
parts cartons from carton.
2, Cut along dashed lines on all four panels
of carton. Remove end panels and lay
side panels flat,
3_ Remove mower and packing materials.
4. Check for any additional loose aprts or
cartons and remove,
CHECK BATTERY
1. Lift hood to raised position.
NOTE: If this battery is put into service after
month and year indicated on label (L) (label
is located between terminals) charge battery
for minimum of one hour at 6-! 0 amp& (See
"BATTERY" in Maintenance section of this
manual for charging instructions).
\
NOTE; You may now roll o rd dve you r tractor
offtheskid, Followthe appropriate instruction
below to remove the tractor from the skid,
z_
,a_ WARNING: Before starting, read, un-
derstand and follow all instructions in the
Operation section of this manual Be sure
tractor is in a wellwentilated area. Be sure
the area in front of tractor is clear of other
people and objects.
TO ROLL TRACTOR OFF SKID
(See Operation section for location
and function of controls)
1o Raise attachment lift lever to its highest
position,
2_ Release parking brake by depressing
brake pedal,
3. Place freewheel control in "transmission
disengaged position" (See "TO TRANS-
PORT" in the Operation section of this
manual).
4, Roll tractor forward off skid.
8
Loading ...
Loading ...
Loading ...