Loading ...
Loading ...
Loading ...
12 / 24
Touch Screen During Swimming
To protect the touch screen from unintentional touches and water interference, the watch
automatically disables the touch screen feature after you start swimming. In this case, you can
control the workout with the watch buttons. After the workout ends, the watch will re-enable
the touch screen function.
Workout GPS positioning
If you select Outdoor workouts, wait until GPS positioning is successful on the Workout
preparation screen. Then, tap the green status bar to begin the workout. This allows the watch
to record complete workout data and prevents data inaccuracy due to workout tracking loss.
Positioning guide:
1. If you receive a prompt to update the AGPS after selecting a workout, start the Zepp app on
your phone and connect it with the watch to update AGPS. Then, select a workout again. This
operation reduces the time spent searching for a signal and avoids search failure.
2. If, during the positioning process, the GPS signal icon continues to flicker, an open area
can offer you faster positioning for a better GPS signal, as nearby buildings may block and
weaken the signal, extending the positioning time and even causing positioning failure.
3. After successful positioning, the red status bar will be changed to green. The GPS signal
shows the current GPS signal strength.
AGPS is a kind of GPS satellite orbit information which helps the watch accelerate the GPS
positioning process.
Automatic workout identification
Workout types that can be identified include walking, indoor walking, outdoor running,
treadmill, outdoor cycling, pool swimming, and rowing machine.
Automatic workout identification is a process where the watch automatically determines the
workout type and records a single workout after related workout characteristics are compiled
with and your workout continues for a period.
You can set this in Settings > Workout > Workout Detection.
Type: After you select a workout type, the automatic identification feature is enabled for the
workout.
Reminder: When the feature is enabled, a pop-up dialog box is displayed when a workout is
identified or ends. When the feature is disabled, data is recorded silently upon workout
identification and a dynamic icon is displayed on the watch face screen.
Sensitivity: Higher sensitivity indicates a shorter identification time. Identification time is
prolonged if the sensitivity is low. Set as required.
* Continuous workout status monitoring will greatly reduce the battery life. When no workout
is selected, the Workout Detection feature is not enabled. If the watch detects an ongoing
workout, some data cannot be synchronized with the app.
Workout history
When a workout ends, the workout record will automatically be saved to Workout History.
If you end the workout when the workout time is too short, the watch will ask you whether to
save it. Due to the limited storage space, it is recommended that you synchronize the workout
data to the app soon after completing a workout; otherwise, the workout data may be
Loading ...
Loading ...
Loading ...