Loading ...
Loading ...
Loading ...
GENERAL SAFETY INSTRUCTIONS 06
Clearing a Clogged Rotor Housing
Maintenance and Storage
SS-40A
●
●
●
●
Never direct the discharge opening toward people or toward areas where property damage can occur. Keep
children, pets, and other bystanders away from the work area.
Do not overload the machine capacity by attempting to clear snow at too fast a rate.
Look behind you and use care when backing up with the cordless snow shovel. Never operate the cordless
snow shovel without good visibility or light. Always be sure of your footing and keep a firm hold on the
handles.
Walk, never run, with the unit.
●
●
●
●
Check all fasteners at frequent intervals for proper tightness to ensure that the equipment is in safe working
condition.
Always refer to the operator's manual for important details, such as how to properly store your cordless
snow shovel for an extended period of time.
Maintain or replace safety and instruction labels as needed.
Run the machine for a few minutes after you finish clearing snow to prevent the rotor blades from freezing.
Hand contact with the rotating blades inside the rotor housing is the most common cause of injury
associated with cordless snow shovels. Never use your hands to clear a clogged rotor housing.
To clear the rotor housing:
● Shut the motor off and remove the battery.
● Wait 10 seconds to be sure the rotor blades have come to a complete stop.
Always use a clean-out tool, not your hands, to free the rotating blades.
Loading ...
Loading ...
Loading ...