Loading ...
Loading ...
Loading ...
OPERATION 18
Angle Adjustment
Operating Tips
Fig. 10
SS-40A
1.
2.
3.
4.
5.
6.
7.
Start the cordless snow shovel.Once started, push the shovel forward at a comfortable yet steady pace,
ensuring that you clear the entire path. The clearing width of the snow shovel and the depth of snowfall should
dictate your forward speed.
Direct the snow discharge to the right or to the left by holding the cordless snow shovel at a slight angle.
To remove snow most efficiently, throw the snow downwind and slightly overlap each swath.
Avoid using the snow shovel on gravel surfaces unless the shovel is adjusted for such surfaces in accordance
with the operator's manual.
This cordless snow shovel cuts a path 16 in.(41 cm) wide and up to 6 in.(15 cm) deep in one pass.
When clearing deeper drifts, hold the cordless snow shovel by the upper and auxilary handles.Using a
swinging or sweeping motion to remove up to 6 inches (15 cm) of snow with each pass Repeat as many times
as needed.
Remove the batteries after using the cordless snow shovel. Hang the shovel so it will not be knocked or
damaged.
If you want to turn the knob to the right, turn the knob in a clockwise direction.. If you wish to turn the snow
guide plate to the left, please turn the knob counterclockwise.
WARNING! Don't adjust the angle when the machine is running. If you want to adjust the angle,
please stop the machine first. When you adjust the angle, please check the picture below.
Loading ...
Loading ...
Loading ...