Loading ...
Loading ...
Loading ...
- 9 -
Assembling your vacuum
NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories
n ATTACHING THE FLEXIBLE HOSE & POWER NOZZLE TO THE VACUUM
1. To connect the flexible hose to the unit, insert the air intake suction end of the hose into the air inlet
connection of the vacuum.
2. Insert the handle of the electric power hose (Fig. 3/#1) into the upper end of the electric telescopic wand. Be sure
to align the 2 prong electrical connections as you press the two pieces together. (Fig 3/#2).
3. Attach the electric power nozzle (Fig. 3/#3) to the bottom end of the telescopic tube. Be sure to align the 2 prong
electrical connections as you press the two pieces together. (Fig 3/#4).
4. Adjust the length of the telescopic tube. Press down the release latch on the tube to do this (Fig. 4/#1). Then pull
the handle of the telescopic tube to extend it to your desired length (Fig. 3/#1). Let go of the release catch while
pulling until it locks in place. You will hear a distinct click.
Loading ...
Loading ...
Loading ...