Loading ...
Loading ...
Loading ...
Settings
1. Open the door and press Power.
2. To open the dishwasher's settings menu, press and hold Auto and Delay until SEt is shown on
the display.
3. Press Boost to step through the settings menu.
4. Press Auto to step through the alternatives.
5. Confirm the selected setting by pressing Boost.
6. To exit the menu, step through it or press Power.
Confirm / Next settingSelect alternative
Open the dishwasher's settings menu
AlternativesSettings
A beep confirms that the control panel has been pressed.2:00 (Off)Sounds (volume)
A beep indicates when a dishwashing program has ended.2:01 (Low)
Error messages are always indicated by a loud buzzer.2:02 (Mid)
2:03 (High)
Setting for rinse aid dosage. The rinse aid dispenser can
be adjusted between 3:00 (Off) and 3:05 (High dosage).
3:00 (Off)
3:01
Rinse aid
Increase the rinse aid dosage:3:02
3:03
• If the dishes have water marks.
3:04
3:05 (High)
Reduce the rinse aid dosage:
• If the dishes have a sticky white/blue film.
• If the dishes are streaked.
• Heavy foaming. If you have very soft water, the rinse
aid can be diluted 50:50 with water.
Default: 3:04
Activate this setting when using an all-in-one detergent that
contains rinse aid.
5:00 (Off)
5:01 (On)
TAB
This setting reduces the rinse aid dosage.
Default: 5:00
Any error messages.F--Error readout
When contacting the Customer Care Center, you may be
asked to provide the most recent error messages.
Restores all settings to the factory defaults.rStRestore factory de-
faults Select rSt and confirm by pressing Start.
To exit the dishwasher's settings menu, select End and
press Boost.
EndExit
19
Loading ...
Loading ...
Loading ...