Loading ...
Loading ...
Loading ...
SIGLENT
SVA1000X User Manual 80
Chapter 3 Programming Overview
The Siglent SVA1000X Series analyzer features LAN, USB Device, and SIGLENT GPIB_USB
module interfaces. By using a computer with these interfaces, and a suitable programming
language (and/or NI-VISA software), users can remotely control the analyzer based on SCPI
(Standard Commands for Programmable Instruments) command set, Labview and IVI
(Interchangeable Virtual Instrument), to interoperate with other programmable instruments.
This chapter introduces how to build communication between the analyzer and a controller
computer with these interfaces.
3.1 Remotely Operating the Analyzer
The analyzer provides both the USB and LAN connection which allows you to set up a remote
operation environment with a controller computer. A controller computer could be a personal
computer (PC) or a minicomputer. Some intelligent instruments also function as controllers.
3.1.1 USB: Connecting the Analyzer via the USB Device port
Refer to the following steps to finish the connection via USB-Device:
1. Install NI-VISA on your PC for USB-TMC driver.
2. Connect the analyzer USB Device port to a PC with a USB A-B cable.
3. Switch on the analyzer
Figure 3-1 USB Device
The analyzer will be detected automatically as a new USB hardware.
3.1.2 LAN: Connecting the Analyzer via the LAN port
Refer to the following steps to finish the connection via LAN:
1. Install NI-VISA on your PC for VXI driver. Or without NI-VISA, using socket or telnet in
your PC’s Operating System.
2. Connect the analyzer to PC or the local area network with a LAN cable
3. Switch on the analyzer
Loading ...
Loading ...
Loading ...