Loading ...
Loading ...
Loading ...
8
ENG
Technical Specifications
Specifications 60 cm Built-in oven
Lamp power 15-25 W
Thermostat 40-240 / Max °C
Lower heater 1200 W
Upper heater 1000 W / 1200 W
Turbo heater 1800 W
Grill heater Small grill 1000 W / 1200 W Big grill 2000 W / 2400 W
Supply voltage 220V-240 V 50/60 Hz.
Ensure that electrical installation is suitable for operationalising the appliance. If not, call an electrician and plumber
to make necessary arrangements. Manufacturing firm can't be hold responsible for damages to arise due to
operations by unauthorized people and product warranty becomes void.
WARNING!
• It is customer's responsibility to prepare the location the product shall be placed on and also have power utility
prepared.
• The rules about electrical local standards must be adhered to during product installation.
• Check for any damage on the product before installing it. Do not have product installed if it's damaged.
Damaged products pose danger for your safety.
INSTALLATION OF APPLIANCE
Important Warnings for Installation
Technical specifications can be changed without prior notice to improve product quality.
The values provided with the appliance or its accompanying documents are laboratory readings in accordance
with the respective standards. These values may differ depending on the use and ambient conditions.
Figures in this guide are schematic and may not be exactly match your product.
Cooling fan shall take extra steam out and prevent
outer surfaces of appliance from overheating
during operation of oven. This is a necessary
condition for better appliance operation and
better cooking.
Cooling fan shall continue operation after cooking
is finished. Fan shall automatically stop after
cooling is completed.
A clearance must be left behind the enclosure
where you’ll place the appliance for efficient and
good operation.
This clearance shouldn’t be ignored as it’s
required for ventilation system of the appliance
to operate.
Figure 1
Loading ...
Loading ...
Loading ...