Loading ...
Loading ...
Loading ...
English 6
Use asmall flatheadscrewdriver (oryourfingernail) to remove the lens.
Pulldamagedbulbstraightout from thesocket to remove.Press pins in bulb base
straight into socket until fully seated.Snaplens back into place.
Do notuse cooktop while hood is disassembled, to ensureadequate ventilation.
Before CallingService
Use the suggestions in the chart below before calling forservice to avoidservice
charges.
Troubleshooting Chart
Figure5:Light Bulb Replacement
Service
Table2:Troubleshooting
Problem Suggested Solution
Noise during operationSome noise is normal do to vibration andair movement.
Excessive noise could indicate oneofthe following:
1. Ductwork is too small /undersized
2. Ductwork is too large /oversized
3. Ductworkisloose
4. Transitionistoo small or is loose
5. Wood screwsare notfully tightened
6. Loose screwsintrimparts,etc.
Check InstallationInstructionstoverify that ductwork is the
proper size.Tightenscrews.
Noisewhen unit is off
Backflowflap on outsideofduct wall cap moves with
the wind.This is normal.
Loading ...
Loading ...
Loading ...