Loading ...
Loading ...
Loading ...
23
5. PowerSensor™
How does it work?
• PowerSensor works on principle
of transmission and reception of
harmless “infrared” signals in order
to detect user-presence.
• When the user is in front of the
monitor, the monitor operates
normally, at the predetermined
settings that the user has set- i.e.
brightness, contrast, color, etc
• Assuming that the monitor was set
to 100% of brightness for example,
when the user leaves his seat and is
no longer in front of the monitor,
the monitor automatically reduces
the power consumption upto 75%.
User present in front User not present
ttaW
Power consumption as illustrated above is for reference purpose only
Setting
Default settings
PowerSensor is designed to detect the
presence of the user located between 30
and 100 cm (12 and 40 inches) from the
display and within ve degrees left or
right of the monitor.
Custom settings
If you prefer to be in a position outside
the perimeters listed above, choose
a higher strength signal for optimal
detection eciency: The higher the
setting, the stronger the detection
signal. For maximum PowerSensor
eciency and proper detection, please
position yourself directly in front of your
monitor.
• If you choose to position yourself
more than 100 cm or 40 inches
from the monitor use the maximum
detection signal for distances up to
120 cm or 47 inches. (Setting 4)
• Since some dark colored clothing
tends to absorb infrared signals even
when the user is within 100 cm or 40
inches of the display, step up signal
strength when wearing black or
other dark clothes.
Hot key
(for selected models
only)
Sensor distance
3
Landscape/Portrait mode
ATTENTION
PowerSensor off
ATTENTION
PowerSensor off
Above illustrations are for reference purpose only, may not
reect the exact display of this model.
How to adjust settings
If PowerSensor is not operating correct-
ly inside or outside the default range,
here’s how to ne-tune detection:
• Enter to OSD menu.
• You will find the adjustment bar.
• Adjust the PowerSensor detection
adjustment to Setting 4 and press
OK.
• Test the new setup to see if
PowerSensor properly detects you in
your current position.
• PowerSensor function is designed to
work in Landscape mode (horizontal
position) only. After PowerSensor
turn on it, it will automatically turn
Off if the monitor is used in Portrait
mode (90 degree/vertical position);
Loading ...
Loading ...
Loading ...