Loading ...
Loading ...
Loading ...
19 / 28
Low blood oxygen alerts
Go to the Blood Oxygen app, swipe up to the last page and go to Settings page to enable Low
blood O2 Alert, or can access it in Zepp APP>Profile>Amazfit GTS4>Health
Monitoring>Blood Oxygen>Low blood O2 Alert. In a resting state (except sleep), the device
will notify you if your blood oxygen falls below the limit for 10 minutes.
1. After Auto Blood Oxygen Monitor is enabled, enable the Low blood oxygen alerts feature.
2. In the settings for low blood oxygen alerts, the alert value can be adjusted or alerts can be
disabled.
Precautions for blood oxygen measurement
1. Wear the watch a distance of one finger away from the carpal and remain still.
2. Wear the band tightly, with an appropriate sense of pressure.
3. Place your arm on a tabletop or a stationary surface, with the watch screen facing up.
4. Maintain still during measurement and focus on the measurement.
5. Factors such as hair, tattoo, shaking, low temperature, and incorrect wearing of the watch
may affect measurement results, and even lead to measurement failure.
6. The measurement range of the watch is 80%-100%. This feature is for reference only and
should not be used as a basis for medical diagnosis. If you feel unwell, please seek medical
advice.
Stress
The stress index is calculated based on changes in heart rate variability. It is a reference for
health status evaluation. You should rest more when the index is high.
Wake up the watch, press the side button on the watch face page to go to the app list, and
swipe up and down to select and open the Stress app. In the Stress app on the watch, you can
view your most recently measured stress value, all-day stress status, stress interval
distribution, and pressure status over the last seven days. Synchronize the data to the app to
view more information. Setting the Stress app as a quick access app allows you to easily
measure your stress.
When the phone and watch are connected, the following stress settings can also be accessed
in the Zepp app under Profile > Amazfit GTS 4 > Health Monitoring.
Manual stress measurement
In the Stress app, tap to manually measure your stress. When the measurements are
done, the device will stay on the Stress screen and continue to measure and update the data.
Auto stress monitoring
Open the Stress app, swipe up to the last page, and go to stress settings to enable Auto Stress
Monitoring. This will automatically measure the stress every five minutes to show you stress
changes throughout the day.
Stress Relief Reminder
In a resting state (except sleep), the device will notify you if your stress level goes above the
limit for 10 minutes.
1. After Auto Stress Monitoring is enabled, enable the Stress Relief Reminder feature.
2. In stress settings, enable Stress Relief Reminder, and then you can receive reminders.
Loading ...
Loading ...
Loading ...