Loading ...
Loading ...
Loading ...
Driver Assistance System
7-112
• Driving speed limit
OJX1079101L
OJX1079101L
When Highway Driving Assist is
canceled by the hands-off warning,
The driving speed will be limited.
While Driving Speed Limit function
is operating, the ‘Driver’s grasp
not detected. Driving speed will be
limited’ warning message will appear
on the cluster, and an audible warning
will sound continuously.
• Driving to one side within lane (if
equipped)
OADAS037
OADAS037
When vehicle speed is above
40 mph (60 km/h), if a detected
vehicle around you is driving at a
close distance, your vehicle will
control the steering in the opposite
direction of the vehicle to assist in
safe driving.
If there a detected vehicle in both
sides of the lane that are driving
close to you, the function will not
veer to the opposite side of the
lane.
Highway Driving Assist standby
When Smart Cruise Control is
temporarily canceled while Highway
Driving Assist is operating, Highway
Driving Assist will be in the standby state.
At this time, Lane Following Assist will
operate normally.
Information
• Driving Speed Limit helps you drive
below 40 mph (60 km/h). At this time,
the vehicle decelerates due to the
vehicle ahead. After the vehicle has
decelerated, it cannot automatically
accelerate.
• Driving Speed Limit will cancel in the
following circumstances:
- When the driver grabs the steering
wheel again
- When the driver turns on Lane
Following Assist by pressing the
button
- When Smart Cruise Control (+, -,
) switch or button is pushed,
or the accelerator pedal or the brake
pedal is depressed
Highway Lane Change Assist (if
equipped)
Display and control
You can see the status of the Highway
Lane Change Assist function operation
in the Driving Assist view on the cluster.
Refer to “View Modes” section in chapter
4.
Loading ...
Loading ...
Loading ...