Loading ...
Loading ...
Loading ...
Using the fax setup wizard
Notes:
• The setup wizard is available only if no device‑based fax, such as analog, etherFAX, or Fax over IP (FoIP),
is configured.
• Before using the wizard, make sure that the printer firmware is updated. For more information, see the
“Updating firmware” section.
1 From the control panel, navigate to Fax.
2 Select Set up now.
3 Type the fax name, and then select Next.
4 Enter the fax number and then select Done.
Using the Settings menu
1 From the control panel, navigate to Settings > Fax > Fax Setup > General Fax settings.
2 Configure the settings.
Using the Embedded Web Server
1 Open a web browser, and then type the printer IP address in the address field.
Notes:
• View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
• If you are using a proxy server, then temporarily disable it to load the web page correctly.
2 Click Settings > Fax > Fax Setup > General Fax Settings.
3 Configure the settings.
4 Apply the changes.
Set up, install, and configure 23
Loading ...
Loading ...
Loading ...