Loading ...
Loading ...
Loading ...
26 •
A
B
C
F
E
D
Side burner
□ Loosen side burner in side shelf. (B ). To loosen, unscrew and remove two front screws holding side burner in
place. (A). Note: Do not loosen electrode screw.
□ Install the igniter wire to side burner valve.(C)
□ Remove the 2 pre-installed screws from the valve stem and set them aside. (D)
Insert the gas valve into the side burner tube.Insert valve control stem through hole in fascia. (E).
□ Install previously removed 2 screws .Note: Do not tighten these 2 screws until the bezel is attached to fascia and
valve face.(F).
□ Attach bezel to facial and valve face with the installed screws .Firstly attach one side key hole of
bezel to the screw ,then attach the other one to the other screw. Make sure the black mark facing
up. Tighten the 2 screws .(G)Push control knob onto side burner valve stem. (H)
□ Reattach side burner to side burner shelf with the 2 previously removed screws. (I)Replace side burner grate. (J)
□ Insert electrode wire into the head of electrode.(K)
□ Unscrew igniter cap from control panel. Insert (1) AA battery (provided in blister pack) into battery slot with
positive end (+) facing outward. (L)
\
A
B
C
D
E
F
Loading ...
Loading ...
Loading ...