Loading ...
Loading ...
Loading ...
Left Side Shelf
□Slide 4 hooks onto push bar shown below. (A). Hook ends must face away from grill in operation position.
Remove the (2) M5x15 screws, lock washers and flat washers pre-assembled to the push bar ends, and use
them to attach push bar to shelf. (A). Attach fascia to left side shelf with (2) M5x10 hex bolts and (2)M5 flat
washes and (1) M4X10 hex bolt . (B)
□ Hang left side shelf onto two pre-installed screws on left side of firebox. (C)
□ Attach shelf to firebox as follows: - From inside to outside of firebox with (3) M6x13 screws and (3) M6 flat washers. (D)
IMPORTANT: Make sure side shelf fascia is aligned with control panel before tightening screws. -
From outside to inside of firebox with (1) M4x12 screw. (E)
Fully tighten the pre-installed screws on left side of firebox to complete attachment of left side shelf.
9
B
A
C
24•
M5 f M5 Flat washer Qty: 2 pcs
M4X10 hex bolts Qty: 1pc
M6X13 screw: Qty: 3 pcs
M5X10 hex bolt Qty: 2 pcs
B
A
D
C
X M4X12 screw Qty: 1pc
M6 flat washer Qty: 3pcs
E
Loading ...
Loading ...
Loading ...