Loading ...
Loading ...
Loading ...
global.BISSELL.com 9
1
3 4
2
Replacing the Battery
DO NOT REMOVE THE PLASTIC SHRINK
SLEEVE FROM THE BATTERY PACK.
Use a Phillips-head screwdriver to
replace the battery cover.
A Phillips-head screwdriver is
required for this task.
Turn the power switch OFF. Use a
Phillips-head screwdriver to remove
the two screws and battery cover.
Remove the battery and disconnect.
Connect the new battery and install
into battery compartment.
After repeated use, debris can accumulate on the
sensors of the robot and the robot’s performance
could be affected.
To ensure the best efficiency, the sensors should
be cleaned off periodically by brushing any debris
from them.
Before cleaning the sensors, ensure the power
switch on the robot is in the OFF (0) position.
Cleaning the Sensors
WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
Loading ...
Loading ...
Loading ...