More of a video person?
Find additional resources like tips
and troubleshooting, videos, product
registration, parts, and more on the
BISSELL Connect App.
H
O
M
E
C
L
E
A
N
I
N
G
E
X
P
E
R
T
S
E
S
T
.
1
8
7
6
U
.
S
.
A
.
CLEANVIEW® CONNECT
ROBOTIC VACUUM
MODEL 2908F
2 global.BISSELL.com
WARNING
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:
» Do not use outdoors or on wet surfaces.
» Do not allow to be used as a toy. Close attention
is necessary when used by or near children.
Battery pack usage by children should be
supervised.
» Do not use for any purpose other than described
in this user guide. Use only manufacturer’s
recommended attachments.
» Do not charge with damaged docking station
or plug. If appliance is not working as it should,
has been dropped, damaged, left outdoors,
or dropped into water, have it repaired by a
qualified technician.
» Do not close a door on cord or plug, or pull cord
or plug around sharp edges or corners. Do not
run appliance over cord or plug. Keep plug and
docking station (including the charger) away
from heated surfaces.
» Do not unplug by pulling on cord. To unplug,
grasp the charger, not the cord.
» Do not handle charger, contact points,
docking station, or robotic vacuum cleaner with
wet hands.
» Do not put any object into openings. Do not
use with any opening blocked; keep openings
free of dust, lint, hair, and anything that may
reduce air flow.
» Keep hair, loose clothing, fingers, and all parts
of body away from openings and moving parts.
» Do not use to pick up flammable or combustible
materials (lighter fluid, gasoline, kerosene, etc.)
or use in areas where they may be present.
» Do not use in an enclosed space filled with
vapors given off by oil-based paint, paint
thinner, some moth-proofing substances,
flammable dust, or other explosive or toxic
vapors.
» Do not use to pick up toxic material (chlorine
bleach, ammonia, drain cleaner, etc.).
» Do not pick up anything that is burning or
smoking, such as cigarettes, matches or
hot ashes.
» Do not use without filter in place.
» Keep appliance on a level surface.
» Do not carry the robotic vacuum cleaner while
it is running.
» Remove the cords from other corded products
out of the area to be cleaned.
» Do not operate the vacuum in a room where an
infant or child is sleeping.
» Do not operate the vacuum in an area where
there are lit candles or fragile objects on
the floor.
» Do not operate the vacuum in a room that has
lit candles and/or fragile objects on furniture
that the vacuum may accidentally hit or bump.
» Do not allow children to sit on the vacuum.
» Prevent unintentional starting. Ensure the
ON/OFF switch is in the OFF position before
connecting to battery pack, picking up or
carrying the appliance. Do not carry the
appliance with your finger on the switch.
» Turn OFF all controls, including the power
switch and disconnect charger from electrical
outlet before making any adjustments,
performing maintenance, troubleshooting,
changing accessories or storing appliance. Such
preventive safety measures reduce the risk of
starting the appliance accidentally.
» Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire
when used with another battery pack.
» Do not use any battery pack which is not
designed for use with the vacuum. Use of any
other battery packs may create a risk of injury
and fire.
» Remove the battery pack from the equipment
when not in use. Do not short-circuit battery
pack. Do not store haphazardly in a box or
drawer where they may be short-circuited
by other metal objects. Shorting the battery
terminals together may cause burns or a fire.
» Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
» Do not use a battery pack or appliance that is
damaged or modified. Damaged or modified
batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
» Do not expose a battery pack or appliance to
fire or excessive temperature. Exposure to
fire or temperature above 130° C may cause
explosion.
» For use only with charger model
GSCU0600S019V12E/SAW12-190-0600UD or
ZD012M190060US.
» For use only with battery pack model INR18650
M26-4S1P.
» Have servicing performed by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the product
is maintained.
» Do not modify or attempt to repair the
appliance or the battery pack.
» Do not charge the machine outdoors.
» Do not position docking station near stairs or
cliff edges.
» Follow all charging instructions. Keep the
temperature range between 40-104°F when
charging battery, storing machine or during
use. Charging improperly or at temperatures
outside of the specified range may damage the
battery and increase the risk of fire.
» Do not incinerate the appliance even if it is
severely damaged. The batteries can explode in
a fire. Do not dismantle, open or shred battery
pack. Do not subject battery pack to mechanical
shock. Dispose of used batteries promptly and
properly.
» Do not remove battery pack from its original
packaging until required for use.
» Do not pick up hard or sharp objects such as
glass, nails, screws, coins, etc.
» This product contains a wireless device. Refer to
website for regulatory information.
» Observe the plus (+) and minus (–) marks on
the battery pack and equipment and ensure
correct use.
» Seek medical advice immediately if battery
pack or parts of the battery pack has been
swallowed.
» Wipe the battery terminals with a clean dry
cloth if they become dirty.
» Do not leave battery pack on prolonged charge
when not in use.
» After extended periods of storage, it may
be necessary to charge and discharge the
battery pack several times to obtain maximum
performance.
» Remove the battery pack from the equipment
when not in use.
» Keep battery pack clean and dry.
» Battery pack needs to be charged before use.
Refer to the manufacturer’s instructions for
proper charging instructions.
» Avoid storage in direct sunlight.
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
This model is for household use only.
WARNING
Read all safety warnings and instructions before using this robotic vacuum
cleaner. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
IMPORTANT INFORMATION
» Do not plug in your robotic vacuum
cleaner UNTIL you are familiar with all
instructions and operating procedures.
» Plastic film can be dangerous.
To avoid danger of suffocation,
keep away from children.
global.BISSELL.com 3
What’s in the Box?
Safety Instructions...........2
Product View ................4
Setup .....................5-6
Operations ................6-7
Maintenance & Care ......7-10
Troubleshooting ............10
Warranty ....................11
Service ......................11
BIS S ELL®
CleanView®
Connect
Docking
Station
Power Adapter
(charger)
Edge Cleaning
Brushes
Rechargeable
Li-Ion Battery
(pre-installed)
Dirt Bin
(pre-installed)
Pleated Filter
Foam Filter
Cleaning Tool
Thanks for buying a BISSELL® CleanView®
Connect Robotic Vacuum
We love to clean and we’re excited to share one of our innovative products
with you. We want your robotic vacuum to work like new for the years to
come, so this guide has tips on how to use, maintain and, if there’s a problem,
troubleshoot.
Your robotic vacuum needs a little setup before getting to work, so flip to the
“Setting Up Your Robot” section and let’s get started!
4 global.BISSELL.com
Product View
WARNING
Do not plug in your robot until you are familiar with all instructions and operating procedures.
3
3
12
7
3 3
4
4
4
8 8
10
11
13
1. Power Switch
2. Start/Pause Button
3. Contact Points
(for automatic charging)
4. Cliff Sensors
5. Bumper
6. Edge Cleaning Brushes
7. Front Wheel
8. Rear Wheels
9. Dirt Bin Release Button
10. Dirt Bin (filters inside)
11. Brush Roll
12. DC Port
13. Removable Battery
14. LED Light Ring
2
5
6
6
1
9
14
global.BISSELL.com 5
3
40"
40"
40"
21
Setting Up Your Robot
Place the back of docking station firmly
against a wall. Ensure there are at least
40 inches to one side, 40 inches to the
opposing side and no obstructions in
front of the docking station.
Insert the docking station power adapter
plug into the port on the side of the docking
station and then plug the other end into the
wall outlet. Turn the robot’s power switch
ON and put on the docking station. The first
charge will take 4-5 hours.
1
4 5
2
Connecting to the App
In the App or Google
Play Store search
“BISSELL Connect” and
download.
From the app, select “Have a BISSELL Connected
Product? Connect it now.” Then choose your
product from the menu. Note: Be sure the device
is near your WiFi router and the robot is fully
charged or in the dock during the pairing process.
Once downloaded, open
the app and sign in or
create a new login.
Make sure you’re near
your WiFi router before
turning the robot ON (I).
Downloading the BISSELL Connect App means you can change your robot’s cleaning
mode, start, pause, or stop your robot, schedule cleanings, view notifications, track your
cleaning history, and troubleshoot all from the palm of your hand.
To put the robot in pairing mode,
press and hold the start/pause
button for 5 seconds until you
hear a single beep.
6 global.BISSELL.com
1 32
Manual Cleaning
Automatic Cleaning
Press the power switch
to the ON (I) position.
To return the robot to
the dock, press the
start/pause button
twice. The button will
flash white as it finds its
way back to the dock.
Press the start/pause
button on the top of the
robot to start cleaning.
When finished, press the
start/pause button again
to stop the robot.
You can designate a day and time for your robot to run automatically using the BISSELL
Connect App. Once the robot is connected to the app, go to the Schedule tab and follow
the on-screen prompts.
Connecting to the App (cont.)
6 7
The QR code needed for setup can
be found by removing the dirt bin and
turning the robot over.
Once you locate and scan the QR
code, follow the instructions in the app
to pair.
Find
Me
Scan
Code
global.BISSELL.com 7
1
4 6
1
32
5
2
Cleaning the Dirt Bin
Press the button on top
of the dirt bin and pull
to remove.
Use the cleaning tool
to brush the filter cover
and filters. Do not wash
the filters.
Open filter door by
pulling both sides apart.
Empty the debris from
the dirt bin.
With filters removed,
rinse the dirt bin with
tap water. Ensure dirt
bin is completely dry
before reinstalling. It is
not necessary to wash
every time.
Do not machine wash
the dirt bin.
Once clean, reinstall the
filters and filter cover,
close and push back
into the machine.
Remove the filter
cover, then the foam
and pleated filters.
Activating Low Power Mode
Press and hold the start/pause button for
15 seconds until you hear 2 beeps. Release
the button to activate low power mode.
Send the robot back to the dock.
15s
8 global.BISSELL.com
A Phillips-head screwdriver is required for this task.
1 2
Use a Phillips-head screwdriver to
remove the screw. Pull up on the base
of the brush.
Push the brush directly onto the
holder. Replace the screws with a
Phillips-head screwdriver.
Replacing the Edge Cleaning Brushes
NOTE: After being used for a period of time, the Edge Cleaning Brushes need to be cleaned
to work more eectively. Once removed, the Edge Cleaning Brushes can be rinsed or soaked
in water. Be sure they are completely dry before returning to the machine.
31
4
2
Clean the brush roll
with the cleaning tool.
Replace the brush roll and
brush guard.
NOTE: The brush roll has two
different end pieces. Ensure
the square-shaped end piece
is inserted into the square-
shaped port.
Pinch the tabs on the
brush guard inward and
pull to remove.
Lift to remove the
brush roll.
Cleaning the Brush Roll
WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
global.BISSELL.com 9
1
3 4
2
Replacing the Battery
DO NOT REMOVE THE PLASTIC SHRINK
SLEEVE FROM THE BATTERY PACK.
Use a Phillips-head screwdriver to
replace the battery cover.
A Phillips-head screwdriver is
required for this task.
Turn the power switch OFF. Use a
Phillips-head screwdriver to remove
the two screws and battery cover.
Remove the battery and disconnect.
Connect the new battery and install
into battery compartment.
After repeated use, debris can accumulate on the
sensors of the robot and the robot’s performance
could be affected.
To ensure the best efficiency, the sensors should
be cleaned off periodically by brushing any debris
from them.
Before cleaning the sensors, ensure the power
switch on the robot is in the OFF (0) position.
Cleaning the Sensors
WARNING
To reduce the risk of electric shock, turn power switch OFF and disconnect plug from electrical outlet
before performing maintenance or troubleshooting checks.
10 global.BISSELL.com
Troubleshooting
Storing Your Robot
Status and Error Notifications
Status Button Light State Light Ring Sound
Power ON
Pulse Once > Blink > On Pulse Once Activation Sound
Cleaning
Blink > Fade In > On Pulse Once > Fade In > 30 seconds > Fade Out Activation Sound
Charging
Breathing Pulse Once > Breathing for 30 seconds > Off 1 Beep
Pairing Mode
Blink Off 1 Beep
Paired
On Solid for 5 Seconds > Fade Out 3 Beeps
Low Battery
Blinking White Off 2 Beeps
Error Button Light State Sound Remedies
Robot is Trapped, Lifted, or
Cli Sensors are Dirty
Flashing Red 1 Beep Place robot on floor away from objects and
resume cleaning. If error persists, use a dry cloth
to clean the 3 cliff sensors on the bottom of the
robot.
Front Caster Wheel Sensor is Blocked
Flashing Red 3 Beeps Remove front caster wheel assembly, clear
debris from assembly housing, reinstall wheel.
Left or Right Wheel is Stuck
Flashing Red > Solid Red 1 Beep Turn robot OFF and remove hair and debris from
wheels.
Edge Cleaning Brushes are Stuck
Flashing Red > Solid Red 2 Beeps Turn OFF the robot and remove hair and debris
from Edge Cleaning Brushes.
Brush Roll is Stuck
Flashing Red > Solid Red 3 Beeps Turn OFF the robot and remove hair and debris
from brush roll.
Bumper is Stuck or Robot is Trapped
Flashing White 2 Beeps Turn OFF the robot and tap the bumper several
times to release any debris that may have
accumulated.
Error Notifications
Status Notifications
This guide has everything you need to get ready for first use, including setting up, using
and maintaining your machine, but online you’ll find additional resources like tips and
troubleshooting, videos, product registration, parts, and more. For a comprehensive
walkthrough of your product and support tips use the BISSELL Connect App.
Store your robotic vacuum cleaner safely indoors where it is unlikely to be damaged.
global.BISSELL.com 11
NOTE: Please keep your original sales receipt. It provides proof of the date of purchase in the event of
a warranty claim. See warranty for details.
This warranty gives you specific legal rights,
in addition to rights you may have under the
Australian Consumer Law. If you need additional
instruction regarding this warranty or have
questions regarding what it may cover, please
contact your local BISSELL Consumer Care on the
details set out below.
It may be necessary to obtain some of your
personal information, such as a mailing address, to
fulfill terms of this warranty. Any personal data will
be handled pursuant to BISSELL’s Privacy Policy,
which can be found at
global.BISSELL.com/privacy-policy.
BISSELL® One-Year Warranty
Subject to the *conditions identified below, BISSELL
will repair or replace (with new, refurbished,
lightly used, or remanufactured components or
products), at BISSELL’s option, free of charge from
the date of purchase by the original purchaser,
for one year, any defective or malfunctioning
part due to manufacturer defect. This warranty
applies to product used for personal purposes, and
not commercial or rental service. This warranty
does not apply to fans or routine maintenance
or consumable components such as filters, belts,
brush rolls, etc., damage or malfunction caused
by negligence, abuse, neglect, unauthorized
repair, or any other use not in accordance with
the user guide. BISSELL recommends that the
original packaging be kept for the duration of the
warranty period in case such need arises within the
warranty period that the item needs repacking and
transportation.
*CONDITIONS OF WARRANTY
Subject to whether such loss is reasonably
foreseeable, BISSELL and its in-country distributors
are not liable for incidental or consequential
damages of any nature associated with the use of
this product.
This warranty is in addition to other rights or
remedies under law. Nothing in this warranty
excludes, limits or modifies any liability of BISSELL
which is imposed by law, or limits or modifies any
remedy available to the consumer which is granted
by law. To make a claim under this warranty
contact BISSELL Australia PTY LTD (details below).
Contact BISSELL prior to returning any goods.
Where agreed, BISSELL will reimburse reasonable
postage / handling costs (if any) for returning
goods to BISSELL. To claim expenses incurred in
making a claim under this warranty please provide
BISSELL with a copy of the receipt of the expenses
by email or post.
For Australian Consumers Only: Our goods
come with guarantees that cannot be excluded
under the Australian Consumer Law. You are
entitled to a replacement or refund for a major
failure and compensation for any other reasonably
foreseeable loss or damage. You are also entitled
to have the goods repaired or replaced if the goods
fail to be of acceptable quality and the failure does
not amount to a major failure.
If your BISSELL product should require service or to claim under our limited warranty, please contact us
as follows:
Australia
Telephone: 1300 247 735
Website: www.BISSELL.com.au
New Zealand
Telephone: 0800 247 735
Website: www.BISSELL.co.nz
Warranty
Consumer Care
©2021 BISSELL Inc. All rights reserved.
Part Number 1624721 01/21 RevA
