Loading ...
Loading ...
Loading ...
EN - 18
UNCLOGGING BAGGER
If hose or bagger boot becomes clogged,
stop forward motion and allow unit to clear
itself. If unit will not clear itself, unclog the
hose and/or bagger boot manually:
1. Stop engine and remove ignition key.
Wait for all moving parts to stop.
2. Flip thumb latch and remove hose.
3. Remove grass from hose and boot.
4. Install hose and secure with thumb latch.
OPERATING TIPS
IMPORTANT: DO NOT remove more than
3.2 cm (1 1/4”) of grass when bagging.
• Cut grass when it is dry.
• Cut grass in two passes when cutting thick,
long, or wet grass. Make the first cut higher
than desired. Make the second cut at
desired height.
• Always use full throttle when bagging.
• Adjust ground speed as necessary to allow
the bagger to pick up clippings.
Your dealer will provide any service or
adjustments which may be required to keep
your unit operating at peak efficiency.
After each use:
• Ensure cast iron weight is installed and
securely fastened.
• Ensure the hose is securely fastened to
hood and boot.
• Ensure mesh bags are installed and hood
assembly is closed and securely latched.
• Ensure all hardware is tight. Pay special
attention to the guards and safety shields.
• Inspect bagger parts for holes, abrasions or
structural damage. Replace any worn or
damaged parts with Ariens service parts.
• Clear away debris in boot, hose or hood
assembly.
IMPORTANT : NEVER spray unit with high-
pressure water. DO NOT store unit outdoors.
• Clean plastic surfaces with sponge and
mild detergent. Dry with a soft cloth.
• Clear away debris under belt cover, in boot,
in hose, and in hood assembly before
storing.
• Remove all dirt, grease, leaves, etc. from
unit.
• Store in a clean, dry area.
• Ensure all fasteners are properly tightened.
Inspect moving parts for damage and wear.
• Touch up all rusted or chipped painted
surfaces.
WARNING: MOVING PARTS
can cut or amputate body parts.
NEVER attempt to clear boot
while engine is running.
ALWAYS stop engine, remove
key, and wait for moving parts to
stop.
Sharp edges can cut. Movement
of parts can cut off fingers or a
hand. Wrap blade(s), wear
sturdy gloves and use extreme
caution when working near
blades.
MAINTENANCE
WARNING: AVOID INJURY.
Read and understand the entire
Safety section before
proceeding.
STORAGE
WARNING: AVOID INJURY.
Read and understand the entire
Safety section before
proceeding.
Loading ...
Loading ...
Loading ...