Loading ...
Loading ...
Loading ...
EN - 11
2. Remove 5/8” nut and 21/32” washer
retaining right mower blade and remove
blade. Retain hardware for reinstallation
and blade for operation without bagger.
See Figure 12.
INSTALL HI-LIFT MOWER BLADE
(MODEL 815047)
1. Install 18" Hi-Lift mower blade (item 14)
into right spindle with hardware removed
earlier. Torque nut to 108.5 N•m – 122.0
N•m (80 lb-ft – 90 lb-ft). Ensure concave
side of washer faces mower blade.
See Figure 13.
INSTALL BAGGER BOOT
See Figures 14 and 15.
1. Install bagger boot (item 20) to deck with
two 5/16” round square neck bolts
(item 12) and 5/16” center locking flange
nuts (item 13).
2. Secure boot to deck with 5/16” hex bolt
(item 16), 5/16” flat washer (item 17) and
5/16” center locking flange nut (item 13).
WARNING: On multi-blade
mowers, rotation of one mower
blade will cause all blades to
rotate.
WARNING: Mower blades are
sharp and can cut you. Wrap the
blade(s) or wear gloves, and use
extra caution when servicing
them.
Figure 12
Figure 13
14
Loading ...
Loading ...
Loading ...