Loading ...
Loading ...
Loading ...
EN - 9
4. Secure the front of footrest/weight tray
assembly to the chassis with hardware
installed in step 3 and two 1/2” center
locking flange nuts removed earlier. See
Figure 5.
5. Install two 5/16” x 3/4” round head square
neck bolts removed earlier through the
two holes on the back of footrest/weight
tray assembly. Secure assembly to
chassis with two 5/16” center locking
flange nuts removed earlier.
See Figure 6.
6. Adhere the grip adhesive (item 3) above
the round head square neck bolts on the
back of footrest. See Figure 7.
7. Place cast iron weight (item 4) into weight
tray. Install two 3/8” x 3" hex bolts (item 5)
and 3/8” lock washers (item 6) through
the front of weight. Thread the bolts into
the weld nuts located at the back of the
tray and tighten until the lock washers
engage. DO NOT overtighten bolts.
See Figure 8.
Figure 5
Figure 6
Figure 7
3
Figure 8
4
5
6
Loading ...
Loading ...
Loading ...