Loading ...
Loading ...
Loading ...
Safety and Warnings
8
Electrical Shock Hazard
✓
Before removing a faulty oven light bulb, make sure you turn OFF the
power to the range at the main fuse or circuit breaker panel. If you don’t
know how to do this, contact an electrician.
✓
Do not remove the kick strip grate. Due to electrical wires behind it, the
kick strip grate should only be removed by a qualified technician.
✓
This appliance is equipped with a three-prong grounding plug for your
protection against shock hazard and should be plugged directly into a properly grounded power
outlet. Do not under any circumstances cut or remove the grounding prong from this plug.
✓
Proper Installation – The range, when installed, must be electrically grounded in
accordance with local codes or, in the absence of local codes, with the National Electrical Code,
ANSI/NFPA 70. In Canada, the range must be electrically grounded in accordance with
Canadian Electrical Code. Be sure the range is properly installed and grounded by a qualified
technician.
Failure to follow this advice may result in death or electrical shock.
Tipping Hazard
A child or adult can tip the range over and be killed. Verify that the anti-tip
bracket is securely installed.
Ensure the anti-tip bracket is engaged when the range is moved.
(The Exact anti-tip bracket design might vary)
Do not operate the range without the anti-tip brackets in place. Failure to
follow the instructions in this manual can result in death or serious burns
to children and adults.
Check the below for the proper installation and use of anti-tip brackets.
Even after the safety device is installed, do not step, lean or sit on the oven door or place any
heavy objects on it. Doing so may result in personal injury.
Make sure anti-tip device is installed as follows:
Loading ...
Loading ...
Loading ...