Loading ...
Loading ...
Loading ...
A
B
B
B
A
A
B
B
A
B
B
B
A
B
B
B
c
c
Φ8mm
285mm
Bestway
V1.1
ASSEMBLY
CONNECT TO THE POOL
1. Carefully remove all components from the package and check to ensure nothing
is damaged. If equipment is damaged, immediately notify the retailer from where
the equipment was purchased.
2. The sand filter should be placed on solid, level ground, preferably a concrete
slab. Position the sand filter so the Ports and Control Valve are accessible for
operation, servicing and winterizing.
3. The sand filter must be vertically fixed on ground or a certain pedestal made of
wood or concrete before use to prevent the sand filter from accidental falling.
Fully assembled sand filter will exceed 18 kg. The mounting holes should be
8 mm in diameter and spaced 285 mm apart. Use two bolts and nuts with a
maximum of 8 mm in diameter to fasten the sand filter to the pedestal.
LOAD POOL-GRADE FILTER SAND/FLOWCLEAR™ POLYSPHERE.
NOTE: Use only special pool-grade filter sand, free of all limestone or clay: #20
Silica sand 0.45-0.85 mm, approximately one 8.5 kg bag should suffice. If you do
not use the recommended size filter sand, filtering performance will be reduced
and the sand filter may damaged, thereby voiding warranty.
NOTE: To avoid damaging the Skimmer when adding sand, pour some water into the Bottom Tank to submerse the
Skimmer on the Collector Hub.
NOTE: Sand/Flowclear™ Polysphere not included.
NOTE: Use 28 g (0.06 lbs) Flowclear™ Polysphere to replace 1 kg (2.20 lbs) sand.
7
(You will need a screwdriver.)
MAX
MIN
MAX
MIN
MAX
MIN
#20
0.45-0.85 mm
MAX
MIN
c
c
1
5 6 7
2 3 4
Loading ...
Loading ...
Loading ...