GE - General Electric JGBP32DEM2WW GE gas range

User Manual - Page 28

For JGBP32DEM2WW.

PDF File Manual, 56 pages, Download pdf file

Loading ...
Loading ...
Loading ...
Care and cleaning of the range.
Burner Caps and Heads
NOTE:Beforeremovingtheburnercaps
andheads,remembertheir sloeand location.
Replacethemb thesamelocationafter
cleaning.
Use a sewing needle or twist-tie
to unclog flTe small hole in the
burner head.
Burner caps
Lift off when reel. Wash burner caps
in hot, soapy water and rinse with clean
_Jte_: You may scour with a plastic scouting
pad to remo\e burned-(m fi_od particles.
Burner heads
For proper ignition, make sure the
small hole ill the section that fits over the
electrode is kept open. A sewing needle
ol wire twist-tie works well to tmclog it.
Theslits/b theburnerheadsmustbe keptclean
at aft tithes for an even, unhampered flame.
(logged o1" dirt_ burner pol-ts or electrodes
will not allow tile bm'ner to operate properly.
Any spill on or around an electrode must
be carefifllv cleaned. Take care to not hit an
electrode with an}_hing hard or it could
be damaged.
Y_u should clean the bmner caps and
burnel heads ioutinel), especially after bad
spillovel% which could clog tile openings
ill tile bm'ner heads. I,itt off when cool.
To remove burne&on fl)od, soak tile
burner heads ill a solution of mild liquid
detergent and hot water fi)r 20-30 minutes.
For I/lore Sttlbborn stains, rise a toothbrtlsh.
After cleaning
Befi)re putting tile bm'ner caps and heads
back, shake out excess ware1 and then dry
them thoroughly by setting in a wmm _wen
fi)r 30 minutes.
NOTE:Donotusestee/woo/or scounngpowders
tocleantheburners.
Replacement
I_eplace bm'ner heads over the electrodes
on the cooktop, ill tile correct locations
accoiding to their size.
Onsome models:
V]ediurnheaJ Sma lean
aria can an0 cab
&. ..L
รทยข.
= Frontof ranfle
Large neao arge nearJ
an0 cad alia caE
Onsome models:
iVlediumhead Smallhead
and cap andcap
,,.. o..
Fro tofra e
Medium head Largehead
and cap and cap
Make sure tile slot in tile burner head is
positioned over the electrode.
Replace tile matching size caps onto tile
heads.
Make sm'e that tile heads and caps are
replaced ill tile correct locations.
NOTE: Onsome models, theburnersare all the
same sloeand power
28
Loading ...
Loading ...
Loading ...