Loading ...
Loading ...
Loading ...
© Copyright 2004 - 2022 MAD Design USA. All rights reserved. V0422
5
2. Install L shaped metal nailing ames onto replace.
3. Connect hard wire to the terminal block according to the diagram
below. Choose any connector type according to local building code.
1. Prepare the framed opening using wood or metal studs according to
the Framing Dimensions chart
4. Install the re unit in the framed opening with a minimum 1 ¼
(32mm) drywall screws to secure the unit.
5. Mask the exposed re unit during the drywall process. Install drywall
to the drywall stops on the perimeter of the re insert. For more
information on the drywall stops see the Product Guide on page 3.
Decorate as desired.
6. After installation, user may elect to use the L Metal Deco Trim. To
install, use a small amount of construction adhesive and secure to
the drywall face.
INSTALLATION
To be performed by a qualied electrician according to
local building codes.
Terminal Block
FRAMING DIMENSIONS
Model W H D
EL40 55 3/4” (1416mm) 23” (584mm) 12” (305mm)
EL60 75 3/4” (1924mm) 23” (584mm) 12” (305mm)
EL80 95 3/4” (2432mm) 23” (584mm) 12” (305mm)
EL100 115 3/4” (2940mm) 23” (584mm) 12” (305mm)
EL120 135 3/4” (3448mm) 23” (584mm) 12” (305mm)
H
W
D
Loading ...
Loading ...
Loading ...