Loading ...
Loading ...
Loading ...
If the water does not fl ow due to a water service interruption
Maintenance
Water Filter Drain Valve
1
Use a bucket to fl ush water.
2
If the water level is low after
fl ushing, add more water.
• Prevents odors.
• When the water supply is restored, be sure to perform
a fl ush.
(To prevent waste from remaining in the drain pipe.)
Attention!
Newspaper,
dust cloth, etc.
Large bucket
Pour strongly,
aiming at the center
of the bowl unit.
Water Filter Drain Valve
(Approximately once every 6 months)
<If you think the water pressure has weakened>
What to Do?
If the water does not fl ow due to a water service interruption
CAUTION
Do not remove the water fi lter drain valve while
the shutoff valve is open.
(Otherwise, water may leak out)
3
Unplug the power plug.
8
Open the shutoff valve.
(Page 14)
5
Clean with a tool such as a toothbrush.
• Also, remove any dust from inside the hole of the water fi lter drain valve.
1
Close the shutoff valve.
• The water supply stops.
2
Press to extend the wand,
and then press
again to return
the wand.
(Release the pressure from the water supply pipe.)
7
Insert the power plug.
• The "Power" LED lights up.
6
Reinstall the water fi lter drain
valve.
• Insert the water fi lter drain valve and
use a fl at-head screwdriver to tighten it
securely.
4
Remove the water fi lter drain
valve.
• Loosen the water fi lter drain valve with
a fl at-head screwdriver and then pull it.
Shutoff valve
Flat-head screwdriver
Water fi lter drain
valve
Water fi lter drain valve
35
Reference
34
Loading ...
Loading ...
Loading ...