Loading ...
Loading ...
Loading ...
Power Plug
(Approximately once a month)
Dry cloth Wet cloth
1
Unplug the power plug and
wipe it with a dry cloth.
2
Insert the power plug.
The "Power" LED lights up.
WARNING
●
Periodically remove dust from
the blades and other parts of the
power plug.
•
Unplug the power plug and wipe it
with a dry cloth.
●
Fully insert the power plug.
●
When unplug the power plug, hold
the main body of the power plug.
•
Pulling the power cord may
damage the power plug or power
cord.
Maintenance
Power Plug Main Unit
Do not use a dry cloth
or toilet paper on plastic
parts.
(May cause damage.)
Main Unit
*1 Except when using "Wand cleaning".
*2
Remove the power plug from the outlet to cancel timer
energy saver settings. Set them again. (Page 23)
(The "Timer energy saver" LED for the set time
fl ashes to notify you.)
For safety, unplug the power
plug before maintenance.
*1 *2
WARNING
Always unplug the power plug from
the outlet before maintenance or
inspection.
(Failure to do so may cause electric shock
or malfunction, resulting in a breakdown.)
Main Unit
(Approximately daily)
Attention!
●
This product is an electric appliance. Be careful not to let water seep inside or leave detergent in the gap
between the main unit and bowl unit. (May damage plastic parts or cause a malfunction.)
●
When using a toilet cleaner to clean the toilet, rinse it off within 3 minutes and leave the toilet seat and toilet
lid open.
•
Wipe off any cleaner that remains on the bowl unit.
(If vapor from a toilet cleaner enters the main unit, it may cause a malfunction.)
●
Do not push or pull the covers around the wand with undue force.
(May cause damage or malfunction.)
●
Wipe the back surface of the toilet seat and the toilet seat cushions with a soft cloth tightly wrung out with
water.
(Otherwise adhesion of dirt may result in discoloration.)
Soft cloth
soaked in water
•
Toilet paper
•
Dry cloth
•
Nylon scrubbing brush
(May cause damage)
1
Unplug the power plug.
2
Wipe with a soft cloth that has been soaked in water and wrung out
thoroughly.
■
For heavy dirt
• Wipe with a soft cloth soaked in diluted, neutral kitchen detergent, and then wipe with a soft cloth
soaked in water.
Neutral kitchen detergent
•
Paint thinner
•
Benzene
•
Powdered cleanser
3
Insert the power plug.
• The "Power" LED lights up.
The "Power"
LED goes off .
Lit OFF
28 29
Maintenance
Loading ...
Loading ...
Loading ...