Loading ...
Loading ...
Loading ...
Basic Operation
Mechanism of Auto Functions
Using the Control Panel
For your information
Water may sometimes come out from around the wand when it expands in the warm water tank, but this is normal.
As the warm water tank of hot-water system is used, the temperature of warm water may become lower if it is continuously
consumed.
Cleansing
Stopping
Drying
"Front cleansing"
• Serves as a bidet for ladies.
"Warm air drying"
• Dries your rear.
"Rear
cleansing"
• Cleanses your rear.
"Stopping"
• Stops the
operation.
Temperature setting, Temperature adjustment LED (Page 18)
Adjust temperatures
■
"Wand CLEAN" (Page 16)
Cleans the wand with "EWATER+".
The wand can be automatically cleaned when you
use the cleansing functions (Rear cleansing, Front
cleansing, etc.). (Page 16)
■
"Water pressure adjustment"
You can adjust the water
pressure to one of fi ve levels.
The PRESSURE LEDs lights up
when you sit on the toilet seat.
■
"Wand position adjustment"
You can adjust the washing position as desired to 5
diff erent points.
The washing position returns to the standard position
(3rd point) when you stand up from the toilet seat.
■
"Pulsating cleansing"
Cleanses with the water pressure pulsating between soft and strong.
"Oscillating cleansing"
•
When you press this button
again during use, the wand
moves back and forth to
cleanse your rear thoroughly.
Note
• Sitting back on the toilet seat makes it easier to adjust the wand position and to reduce splashing.
●
Functions that operate
when a button is
pressed during "Rear
cleansing", "Rear soft
cleansing" or "Front
cleansing".
"Rear soft cleansing"
• Cleanses your rear with mild
water pressure.
Main display
(Page 13)
*1 To keep clean the wand every time it is used, water remaining in the wand is drained after you stand up from the toilet seat.
*2 When the cleansing functions (Rear cleansing and Front cleansing etc,) have not been used in 8 hours, the wand is cleaned
automatically. (Water comes out from around the wand.)
The above are default setting
functions.
●
These may be changed.
→ "Various Operations"
(Pages 24 - 27)
Auto wand CLEAN
Flashes
During
"Auto wand CLEAN"
or "Wand CLEAN"
What is meant by "EWATER+" ?
"EWATER+" helps the self-cleaning wand feature working eff ectively
and preventing the dirt accumulation causing the stains.
• "EWATER+" is generated from Potable water.
• "EWATER+" helps to minimize dirty surfaces, but does not make cleaning
unnecessary.
• The eff ect and duration vary depending on the usage environment and
conditions.
"EWATER+" can also be used by pressing the button on
the control panel.
■
Wand
Press
(After wand cleaning, water comes out from around the wand.)
●
To clean the wand with it extended. "Wand cleaning" (Page 33)
As you approach
As you sit As you stand up
*1
Deodorizer
Auto wand CLEAN
Pre-mist
"EWATER+" is used automatically to clean the wand.
●
Deodorizing fi lter needs regular
maintenance.
(Page 33)
Only when the cleansing functions are used.
Starts the auto
power deodorizer
It stops after about 60 seconds.
After about 10 seconds
After about 25 seconds
The wand extends to clean
with the "EWATER+" that
comes out of the base
*2
0
(sec) 10 25
■
"Power deodorizer"
Pressing the button increases the deodorizer power
This button is only enabled when sitting on
the toilet seat.
When you stand up without turning the button
off , it automatically stops after about 60 seconds.
■
"Power ON/OFF"
Pressing it about 3 seconds or longer turns the
power on/off .
Starts
the deodorizer
Pre-mist
Removing odors inside the bowl unit.
A mist is automatically sprayed inside the bowl
unit to make it more difficult for dirt to adhere.
16 17
Operation
Loading ...
Loading ...
Loading ...