Loading ...
Loading ...
Loading ...
26
Water outlet
– Do not kink the outlet hose or pull it lengthways.
– Height difference between the installation surface and the drain:
max. 90 cm, min. 50 cm.
Secure the connection point with the 24-40 mm hose clamp.
Electrical connection
The washing machine must only be connected to an alternating current
via a properly installed earthed socket.
Only use earth-leakage circuit breakers with the following symbol:
The mains voltage must correspond to the voltage specifications on the
washing machine (rating plate).
The connected load and fuse required are specified on the rating plate.
Make sure that:
– the mains plug fits the socket.
– the cable cross-section is adequate.
– the earthing system is properly installed.
– the appliance is not standing on the mains cable,
– the mains plug is accessible at all times.
Changes to the mains cable may only be carried out by a qualified
electrician.
Do not use multiple plugs/adapters or extension cables.
Mains plug:
– Do not insert the plug into the socket or pull it out if your hands are wet.
– When removing the plug from the socket, pull on the plug body only,
not the cable.
– Never pull the plug out during operation.
Fitting the door hinges
to the washing machine
After the washing machine has been installed in the fitted kitchen, it can
be concealed by a door. In this case, the hinges included in the delivery
must be fitted to the washing machine.
Drainage into a siphon
Loading ...
Loading ...
Loading ...