Loading ...
Loading ...
Loading ...
Important Safety Instructions
10
• People who have pacemakers or
other similar devices must make sure
that the operation of these devices is
not affected by the inductive field, the
frequency range of which is between
20 and 50 kHz.
• In conformity with the provisions
regarding electromagnetic
compatibility, the electromagnetic
induction cooktop comes under
group 2 and class B (EN 55011).
• This appliance complies with the
current standards and directives
regarding safety and
electromagnetic compatibility.
However, people who wear
pacemakers should maintain a
minimum distance of 8-12 inches
(20-30 cm) between the pacemaker
and the appliance when it is in
operation. Contact the pacemaker
manufacturer for further information.
• ONLY QUALIFIED SERVICE
PERSONNEL SHOULD PERFORM
REPAIRS. Service personnel must
disconnect the power supply before
servicing this unit.
• Move the appliance into the desired
position with the help of a second
person.
• Check that the surrounding cabinetry
material is heat-resistant.
• Check that the cabinetry has the
required openings.
• To avoid possible overheating, the
appliance must not be installed
behind a decorative door or a panel.
• The power cord must only be installed
or replaced by a qualified technician.
• Use cables that can withstand
temperatures of at least 90°C.
• ELECTRICAL GROUNDING IS
REQUIRED. It is the customer’s
responsibility to:
1. Contact a qualified electrician.
2. Ensure that the electrical system is
adequate and in compliance with
the National Electrical Code
ANSI / NFPA 70 Electrical Code
– latest edition – or the
CANADIAN ELECTRICAL CODE,
C22.11 – 1982 and C22.2 No.
01982 – or latest edition – and
all local codes and ordinances.
• Always check that the controls are in
the “zero” (off) position when the
appliance is not in use.
• Do not attempt to repair or replace
any part of this appliance unless
specifically recommended in this
manual. All other servicing should be
done by a qualified technician.
Loading ...
Loading ...
Loading ...