Loading ...
Loading ...
Loading ...
8
ENGLISH
FRONT PANEL FUNCTIONS
[13] MONITOR SECTION
In this panel four knobs are present; PFL LEVEL controls the level of PFL bus. The PFL signal can be
listened through CONTROL ROOM when two speakers are connected to CTRL ROOM OUTPUT jacks
(see section 11 on Back Panel description) or through HEADPHONE OUTPUT (see section 15). Both
CONTROL ROOM and HEADPHONE OUTPUT are provided with individual level control. CONTROL
ROOM level knob: level control of the signal routed to CTRL ROOM OUTPUT. During the normal use
of the mixer the MAIN MIX signal is routed to this output; when one or more PFL buttons are pressed
the PFL bus signal will be routed to CTRL ROOM OUTPUT and HEADPHONES OUTPUT. HEADPHONES
LEVEL controls the level of the signal sent to the HEADPHONES OUTPUT; set this control to minimum
(-∞) before connection and wear headphones to avoid hearing loss. 2TRACK/USB INPUT controls the
level of the signal present on the 2TRK IN RCA connector (see section 4 of Back Panel description)
and the signal coming from a computer connected to the USB port (see section 32 of the Back Panel
description).
[14] CUE ACTIVE LED
This led lights up when one or more PFL buttons are pressed
[15] HEADPHONES OUTPUT
Connect headphones here to listen to MAIN MIX or PFL signals
[16] AUX SENDS 1 AND 2
Each channel of the E16 mixer is provided with 4 auxiliary sends; the AUX SENDS 1 and 2 are pre fader
sends. The signal of AUXES 1 and 2 are routed to the AUX1 and AUX2 OUTPUTS XLR present on the
back panel (see section 34 on Back Panel description).
[17] AUX SENDS 3
AUX 3 is a selectable pre-fader/post-fader auxiliary send; it is possible to select the pre/post position
pressing the pre/post button (see section 21) positioned close to the AUX 3 MASTER potentiometer
(see section 20). When the selection is pre-fader AUX 3 takes the signal from the channel independently
from the fader position; when the selection is post-fader the AUX 3 takes the signal subjected to the
fader position.
[18] AUX SENDS 4/FX
AUX SEND 4 is a post-fader auxiliary send. This aux feeds the internal Z.CORE DSP FX but in some cases
can be used as further auxiliary send for monitor purpose.
[19] FX TO AUX
These sends allow routing of the signal present in the FX return channel to the AUX sends.
[20] AUX MASTER SECTION
These potentiometers control the general level of the single AUX SENDS from 1 to 3. The PFL button
when pressed allows listening to the signal present in the single aux sends, through speakers connected
to the CTRL ROOM OUTPUT (see section 40 of the back panel description) or through headphones
connected to HEADPHONES OUTPUT (see section 15).
[21] AUX 3 PRE/POST BUTTON
This button allows selection of the AUX 3 position, pre-fader or post-fader; (see section 17)
[22] PAN
These controls allow positioning of the signal present in the mono channel in the stereo image of the
stereo MAIN MIX or BUS OUT.
[23] BAL
These controls characteristic of stereo channels allow balancing of the position of a stereo channel into
the stereo image of the stereo MAIN MIX or BUS OUT.
Loading ...
Loading ...
Loading ...