Loading ...
Loading ...
Loading ...
Problem Possible cause Solution
The motor runs
and the chain ro-
tates, but the
chain does not
cut.
The chain is
blunt.
Sharpen or re-
place the saw
chain.
The chain is in
the incorrect di-
rection.
Turn the chain
loop to the other
direction.
The chain is tight
or loose.
Adjust the chain
tension.
The machine
does not start.
The chain brake
is engaged.
Pull the chain
brake in the di-
rection of the
user to disen-
gage it.
The machine
and battery are
not connected
correctly.
Make sure that
the battery re-
lease button
clicks when you
install the battery
pack.
The battery level
is low.
Charge the bat-
tery pack.
The lock out but-
ton and the trig-
ger are not push-
ed at the same
time.
1. Push the
lock-out but-
ton and hold
it.
2. Push the trig-
ger to start
the machine.
The battery is
too hot or too
cold.
Refer to battery
and charger
manual.
Problem Possible cause Solution
The motor runs,
but the chain
does not cut cor-
rectly, or the mo-
tor stops after
around 3 sec-
onds.
The machine is
in the protection
mode to protect
the PCB.
Release the trig-
ger and start the
machine again.
Do not force the
machine to cut.
The battery is
not charged.
Charge the bat-
tery. Refer to the
battery and
charger manual
for correct charg-
ing procedures.
The chain is not
lubricated.
Lubricate the
chain to de-
crease the fric-
tion. Do not let
the guide bar
and the chain
operate without
sufficient lubri-
cant.
Incorrect battery
storage tempera-
ture
Cool the battery
pack until it de-
creases to the
ambient temper-
ature.
14 TECHNICAL DATA
Voltage 40 V DC
No load speed 20 m/s
Guide bar length 14'' (350 mm)
Chain pitch 3/8" LP (9.5 mm)
Chain gauge .043" (1.1 mm)
Drive links 52 DL
Chain oil capacity
180 ml
Weight (without battery
pack)
7.5 Ibs (3.4 kg)
Chain CL14352TL
Guide bar M1431452-1041TL
Battery model BAF722 and other BAF
series
Charger model CAF series or 29482
charger
13
English
EN
Loading ...
Loading ...
Loading ...