Loading ...
Loading ...
Loading ...
8-Port and 16-Port Gigabit Ethernet Plus Click Switch
Manage and Monitor the Switch User Manual53
• If the host IP address in the Source IP Address field is 192.168.100.x (in which x can be
any number from 0 to 255) and the mask is 255.255.255.0, any device in the range from
192.168.100.0 to 192.168.100.255 can access the local browser interface.
• If the host IP address in the Source IP
Address field is 192.168.100.y (in which y can be
any number from 0 to 7) and the mask is 255.255.255.248, any device in the range from
192.168.100.0 to 192.168.100.7 can access the local browser interface.
CAUTION:
Add the IP address and subnet mask for the device from which you are
accessing the switch to the Access Control table before you add any other
devices to the table. Otherwise, you are locked out from the local browser
interface of the switch.
To add devices to the Access Control table:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
of
f-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser
, enter the IP address of the switch.
If you do not know the IP address of the switch, see
Access the Switch Using a Web
Browser on page 7.
The login window opens.
4. Enter the switch’
s password in the password field.
The switch’s default password is password.
The Switch Information page displays.
5. Select System > Maintenance >
Access Control.
6. Configure the following settings:
• Source IP Address. Enter the IP address of the devices or range of devices that
must be allowed to access the switch over a web browser
.
• Mask. Enter the subnet mask that is associated with the IP address.
7. Click the Add button.
Your settings are saved. Access control is now enabled.
Loading ...
Loading ...
Loading ...