Loading ...
Loading ...
Loading ...
1312
Assembly, Operation & Maintenance InstructionsAssembly, Operation & Maintenance Instructions
Cylinder valve is not on Turn cylinder valve on
Cylinder is empty Replace with a full cylinder
Igniter is not sparking Remove plate and visually check ignition box for a spark. Check that the cables to ignition point, or from the valve to the chassis have not broken or
disconnected. Also check the alignment of the sparker. If there is no spark, contact Everdure by Heston Blumenthal Service.
Injector is blocked Clean injector with a toothbrush. Do not drill out or use wire. Do not remove injector. Contact Everdure by Heston Blumenthal Service.
TROUBLESHOOTING
Burner will not ignite when using the igniter:
Burner ame is erratic:
Gas is leaking from connections:
Burner is blocked Remove cooking surface and check burner for obstruction. Clean ports.
Flame is burning inside
burner (hissing sound)
Turn o burner, allow to cool and re-ignite (page 7)
Regulator is faulty Contact Everdure by Heston Blumenthal Service.
Injector is partially blocked Clean injector with a toothbrush. Do not drill out or use wire. Do not remove injector. Contact Everdure by Heston Blumenthal Service.
Connections are loose Tighten loose connections (do not over-tighten) and leak test under pressure with soapy water solution (page 4)
Hose has deteriorated Contact Everdure by Heston Blumenthal Service - replace.
Gas valve is faulty Contact Everdure by Heston Blumenthal Service.
Threads are damaged Contact Everdure by Heston Blumenthal Service.
BARBEQUE AND STAND ASSEMBLY
The barbeque and hood come fully assembled, with the gas hose connected to the inlet manifold. To assemble, the stand must rst be built (note: for transportation reasons, the
barbeque is packaged bolted to the stand top, and should be removed before attempting to assemble the stand). The barbeque is placed back inside the stand after it has been
assembled and reattached (it can be removed to cook from a raised bench). Only a medium size Philips screwdriver is needed. Open the carton from the top and remove the parts.
Remove all packaging (especially check inside the barbeque chassis) and place parts on a clean surface. Check for any damage or missing parts (if found, contact your service
department).
INCLUDED PARTS FORCE
TM
AND FURNACE
TM
PACKAGING
Remove all internal cartons and packaging from within the barbeque/hood assembly. Remove all external packaging and remove the appliance from the packaging base before
operation. Recycle as per your local government laws.
01/ Hood, barbeque
chassis and 01B stand
top assembly x 1Pc
09 / Cast Iron plate x 1Pc
(FORCE model only)
02 / Left front leg
x 1Pc
10 / Cast iron middle grill
(FURNACE model only)
x 1Pc
03 / Left back leg
x 1Pc
11 / Cast iron grill x 1Pc
(FURNACE model only)
04 / Right front leg
x 1Pc
12 / Cast Iron plate x 1Pc
(FURNACE model only)
05 / Right back leg
x 1Pc
13 / Fat tray
x 1Pc
06 / Bottom shelf
support 2Pcs
14 / Cylinder hook
x 1Pc
07 / Bottom shelf
x 1Pc
15 / Gas cylinder support
chain x1Pc
08 / Cast iron grill x 1pc
(FORCE model only)
A / Bolt M6x12
x 11Pcs
B / Bolt M5 x 12
x 4Pcs
C / Nut M6
x 1Pc
D / Spring washer Ø6
x 9Pcs
E / Spring washer Ø5
x 4Pcs
Loading ...
Loading ...
Loading ...