Loading ...
Loading ...
Loading ...
Flooring
For proper installation, you must place this
refrigerator on a level, hard surface that is the
same height as the rest of the floor.
This surface should be strong enough to support a
fully loaded refrigerator.
To protect the finish of the flooring during
installation, cut a large section of the cardboard
carton and place it under the refrigerator where
you are working.
When moving the refrigerator, you need to pull and
push it straight forwards or back.
Do not wiggle it from side to side.
Z_ CAUTION
When installing, servicing or cleaning behind the
refrigerator, be sure to pull the unit straight out and
push back in straight after finishing.
important: Make sure that you can easily move
your refrigerator to its final location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc.
The following chart details the exact height and
depth of this Samsung Side by Side Refrigerator.
Model
Dimensions [inch (mm)]
RS25H5121** I RS25H5111**
Orlly Cabirlet 908 (35 3/4)
Width
With Leg Front 915.5 (36 1/20)
Only Cabinet 784 (30 9/10)
With Door 857.5 (33 3/4)
Depth With Handle 919 (36 1/5)
90 ° Open F 1169 (46) / R 1295.5 (51)
F 1017.5 (40 1/20)/
135 ° Open R 1107 (43 3/5)
Only Cabinet 1742.5 (68 3/5)
Height With Hinge 1776 (69 9/10)
With Door 1776 (69 9/10)
o llow clearance to the right, left, back
and top when installing.
This will help reduce power consumption
and keep your energy bills lower.
• Make sure you disconnect the water supply line
BEFORE removing the freezer door.
To avoid damage, refer to 'Separating the
water line from the refrigerator' in the manual
(page 12).
Engl sh - 10
Loading ...
Loading ...
Loading ...