Loading ...
Loading ...
Loading ...
6
Fitness Equipment Safety
Instructions
To disconnect turn all controls to the off position,
then remove the plug from the outlet.
• Do not operate equipment on deeply padded, plush
or shag carpet. Damage to both carpet and equipment
may result.
• Before beginning this or any exercise program, consult
a physician. This is especially important for persons
over the age of 35 or persons with pre-existing health
conditions.
• Do not attempt to use your equipment for any
purpose other than for the purpose it is intended.
• Keep hands away from all moving parts.
• The pulse sensors are not medical devices. Their
purpose is to provide you with an approximate
measurement in relation to your target heart rate.
Use of a chest transmitter strap (sold separately) is
a much more accurate method of heart rate analysis
.Various factors, including the user’s movement,
may affect the accuracy of heart rate readings. The
pulse sensors are intended only as exercise aids in
determining heart rate trends in general.
• Wear proper shoes. High heels, dress shoes, sandals
or bare feet are not suitable for use on your
equipment. Quality athletic shoes are recommended
to avoid leg fatigue.
Failure to follow all guidelines may compromise the
effectiveness of the exercise experience, expose yourself
(and possibly others) to injury, and reduce the longevity of
the equipment.
Important Electrical Instructions
WARNING
NEVER remove any cover without rst disconnecting
AC power. If voltage varies by ten percent (10%) or
more, the performance of your E•Glide may be affected.
Such conditions are not covered under your warranty. If
you suspect the voltage is low, contact your local power
company or a licensed electrician for proper testing.
NEVER expose this E•Glide to rain or moisture. This
product is NOT designed for use outdoors, near a pool
or spa, or in any other high humidity environment. The
operating temperature specication is 40 to 120 degrees
Fahrenheit, and humidity is 95% non-condensing (no water
drops forming on surfaces).
Circuit Breakers: Some circuit breakers used in homes
are not rated for high inrush currents that can occur
when a E•Glide is rst turned on or even during use. If
your E•Glide is tripping the house circuit breaker (even
though it is the proper current rating) but the circuit
Loading ...
Loading ...
Loading ...