Loading ...
Loading ...
Loading ...
20
1
Enable image
extension over IP
Uncheck to disable image signal extension over IP. Unless troubleshooting is in
progress, please check this checkbox.
2
Copy EDID data
After checking this checkbox with multicast, the EDID data of the device will be sent to
the connected encoder.
<Remark> This function can only be used in multicast mode.
3
Reminder for
disconnection
timeout
Select the waiting time when the signal source is lost from the drop-down menu, and a
Link Lost message will appear on the screen. There are seven options: 3 seconds, 5
seconds, 10 seconds, 20 seconds, 30 seconds, 60 seconds, or Never Timeout.
If you check and select Turn off screen, the device will stop sending any signal from
the HDMI output port after the waiting time expires.
4
Scaler output
mode
Select the output resolution from the drop-down menu.
Select one, and the output resolution will become the one you selected.
Select Pass-Through, the output resolution will be the signal source resolution. Select
Native, the output resolution will be up-converted to the connected display resolution.
5
Video
(VGA/HDMI)
Select Lock for
Device Button
After pressing [Lock], the video input selection button will be locked and cannot be
used.
6
Video channel
lock (CH+/-) for
device button
After pressing [Lock], the video channel selection button will be locked and cannot be
used.
USB extension over IP
No
Item
Description
7
Enable USB over
IP
Uncheck to disable USB over IP. Unless you do not use USB support, please check
this checkbox. Disabling this function can save a small amount of bandwidth.
8
Operation Mode
Select the required USB operation mode to extend the USB signals. There are three
options: Auto select mode (automatic), Active on link (suitable for unicast), and Active
per request (suitable for multicast).
The default is Auto select mode, which can automatically select the correct USB
operation mode according to the broadcast mode of the encoder.
9
Compatibility
Mode
Select the required USB compatibility mode to enable the special optimization function
to solve the abnormal response of the mouse or touch screen.
Do not check this checkbox unless necessary.
Serial extension over IP
No
Item
Description
10
Serial
communication
settings
Uncheck to disable Serial extension over IP. Unless you do not use serial support,
please check this checkbox. Disabling this function can save a small amount of
bandwidth.
Manually set the baud rate, data bits, parity, and stop bits you need to extend RS-232
signals.
<Remark> The serial communication settings of the encoder and decoder must be the
same.
11
Restart
Press this button to restart the device.
Loading ...
Loading ...
Loading ...