Loading ...
Loading ...
Loading ...
Toremovetheflatrackfromtheoven:
1. Grasprackfirmlyonbothsidesandpullracktoward
you.
2. Whenthestopisreached,tiltrackupsothatthe
upwardlyslopedbackoftherackcanpassunderthe
stop.Pulltheracktherestofthewayout.
Telescopic Rack
To insert the telescopic rack into the oven:
,
2.
Slide the rack in evenly until the rear of the rack is
about 2 inches from the back of the oven.
Tilt the front of the rack up about 3/4's of an inch (A)
and finish pushing the rack all the way back (B).
Note: Avoid striking the oven light cover glass when
pushing the rack into position.
4. Pull the rack forward to engage the bottom of the rack
onto the rear of the rack position guide.
5. Lower the front of the rack to finish seating it on the
rack guide. The rack should feel stable when properly
seated.
,
Slide the movable part of the telescopic rack in and out
a few times to make sure it is able to move freely and
that the non-moving part of the telescopic rack is
securely anchored.
CAUTION
To avoid possible injury or damage to the appliance,
ensure the telescopic rack is installed exactly per
installation instructions and not backwards or upside
down.
To remove the telescopic rack from the oven:
1. Lift the front of the telescopic rack assembly about 1/2
inch and push the rack to the rear about 3/4 inch. This
allows the rack to disengage from the rack position
guide.
2. Lift the rear of the telescopic rack assembly so it clears
the rack position guide and gently pull the rack from the
oven.
Note: Take care to avoid pulling the rack unevenly
which will cause it to bind during extraction, catching
on the oven walls.
3. The back of the telescopic rack drops into place.
English 7
Loading ...
Loading ...
Loading ...