Loading ...
Loading ...
Loading ...
8
Processing Guide:
Processing
Task
Food Suggested Setting Suggested Processing
Procedure
Aerating Milkshakes, smoothies 1, 2 and Pulse
Use chilled milk.
Blend it until desired
consistency is
achieved
Creaming Butter 1
Blend butter until
creamed. DO NOT
OVERPROCESS
Emulsifying Salad dressing 1
Blend until well
combined
Mixing Batters 1, 2 and Pulse
Process ingredients
until just combined
DO NOT
OVERPROCESS
Pureeing
Soups, vegetables,
fruits
2 Blend until smooth
Tips:
• Cut food items for blending into cubes (approximately 1-2cm), this will assist in achieving an
even result.
• Never fill the Blending bottle above the maximum level indicated.
• When pureeing fruit or vegetable, cooked or raw, cut into small pieces to facilitate blending.
• Always ensure stones are removed from fruit as these can harm the blades.
• Do not process hot liquids in your blender. Allow it to cool before processing.
• All the ingredients and foods must be below 40º Centigrade.
Troubleshooting:
Problem Possible Cause Solution
The motor does not
operate.
The safety lock is not connected. Reassemble the blender bottle
and connect to the base correctly.
There is a smell
coming from the
motor/ The motor is
becoming hot.
There is too much food in the
bottle or the motor has been
running for too long.
Reduce the food and run it again
after the unit has cooled down.
The liquid too thick. There is too much food in the
bottle or insufficient liquid.
Reduce the amount of ingredients
added to the blender bottle.
Add more liquid. Ensure that the
maximum limit is not exceeded.
Cleaning & Care:
1. Unplug the appliance base and detach the accessories.
2. Half fill the blending bottle with warm, soapy water.
3. Assemble the bottle and attach to the motor base unit, as described in the Using Your
Appliance section.
4. Press and hold the PULSE function for 1-2 seconds and release. Repeat 3-4 times.
5. Remove the blending bottle and empty and rinse.
6. For thorough cleaning, wash the blending bottle and blending bottle cap again, in the
dishwasher or in warm soapy water.
7. Wash the blending bottle base under running water, with the blades facing upwards. DO NOT
flush water through from the underside of the base.
CAUTION: Take care when cleaning the blades as they are extremely sharp.
Loading ...
Loading ...
Loading ...