Loading ...
Loading ...
Loading ...
7
Before First Use:
Read all instructions and safety information carefully before first use. Please retain this information
for future reference.
1. Remove your appliance from the packaging.
2. Before using the appliance for the first time, carefully clean the lid, bottle and blade unit.
3. DO NOT use any aggressive detergents, brushes with metal or nylon bristles or sharp objects
for cleaning the unit.
4. Your appliance is now ready for normal use.
5. Dispose of the packaging in a responsible manner.
Using Your Appliance:
1. Place the ingredients into the blending bottle.
2. Screw the blending bottle base on to the bottle, turning clockwise to tighten.
3. Place the blending bottle assembly onto the motor base and rotate clockwise until there is an
audible click confirming it is locked in to position. The markings on the motor base and the
bottle should be aligned.
4. Plug the unit in to a mains socket.
5. Turn the control dial to the desired speed – ‘1’, ‘2’ or PULSE.
Note: The PULSE speed is equivalent to speed ’2’ and the unit operates for as long as the control dial
is held in this position. The unit will operate at Speed ‘1’ or ‘2’ continuously until the control dial is
turned to a different position or turned to OFF ‘0’ .
6. Once the ingredients are sufficiently blended turn the control dial to OFF ‘0’.
7. Switch off the appliance at the socket, unplug and disassemble the unit.
WARNING: The continuous operating time must not exceed 3 minutes.
To Disassemble The Appliance:
1. Turn the blending bottle anti-clockwise to remove from the motor base.
2. Turn the blending bottle upside down and unscrew the blending bottle base, anti-clockwise.
3. Pour out the contents. Alternatively, retain the mixture in the bottle and screw the blending
bottle cap clockwise on to the blending bottle. Push up the snap fastener on the lid to open
the outlet to drink directly from the bottle or pour our as required.
CAUTION!: If the blender becomes blocked, turn the control dial to OFF ’0’, switch off at the wall
socket and unplug before disassembling and clearing the blades.
Loading ...
Loading ...
Loading ...