Loading ...
Loading ...
Loading ...
MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
Check Brake Operation
Check Tire Pressure
Check Operator Presence and
r Interlock Systems If
R Check for Loose Fasteners V _
A Sharpen/Replace Mower Blades
T Lubrication Chart
0 Check Battery Level
R Clean Battery and Terminals
Check Transaxle Cooling
Adjust Blade Belt(s) Tension
Adjust Motion Drive Belt(s) Tension
Check Engine Oil Level
Change Engine Oil
E Clean Air Filter
U Clean Air Screen
G Inspect Muffler/Spark Arrester
iReplace Oil Filter (If equipped)
E Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
Change Coolant
SERVICE DATES
J,
_ J
i
1 . Change mote often when operating U_f a heavy load or in high ambient temperatures. 6 - NOt requited if Bquipped with maintenal_ce-lree battery.
2. Se_,_3e more o_n wt_en Operating it1 ditty or dusty conditJon$ 7. m_ghten fronl axle pivot bolt to 35 ft.-Ib$, maximum.
3 - if equipped with oil fitter, change oil evely 50 hours. Do not overtlghten
4. Replace blades mote often when mowing in sandy 8oi1. 8 ° Hav_ your nearest authorized servk:e cer ttet/departmenl
5 - if equipped with adiuslable system perform Ibis service.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air fitter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check coolant level.
3. Check brake operation.
4. Check tire pressure.
5. Check operator presence and
interlock systems for proper operation.
6. Check for loose fasteners.
LUBRICATION CHART
(_ Tie Rod Ball Joints
_) Spindle -- _L'Z'- Spindle(_)
/....... "_-I Zerk
Zerk_,-
"_..... __L_p,,,FrontWheel _)
\_-._t _ Bearing
(_) Front Wheel " _2_:_'-_,_rk
Bearing zefl
_) Steering "_" _ne(_
Sector "_
Gear Teethi_ .,,,;i i-,_ I I (2)Mandrel
_'""" ;":"-_/-]L_ Zerks
OSpray Silicone Lubriant (Move Boots to
Lubricate)
@General Purpose Grease
_Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt that
will shorten the life of the self-lubricating
bearings. If you feel they must be lubricated,
use only a dry, powdered graphite type
lubricant sparingly.
2O
Loading ...
Loading ...
Loading ...