Loading ...
Loading ...
Loading ...
7
The tim
er button
is only used for the timer function when the hood is working.
(Press the button will be invalid when the hood is under standby mode or open the
lamp separately).
5.1 Press the timer button, the hood enter into the timer function. The timer setting
is 9mins and the display shows “9”.
5.2 After the timing function starts, the display shows “9”, “8”, “7”..., decreasing by
minute. After the timing is completed, the motor will automatically cut off the power
immediately and the motor output will be turned off. The lights are off at the same
time.
5.3 Press the timer button once to enter the timer function. Press again to exit the
timer function. The above steps can be operated repeatedly. In the timing state,
pressing the speed button will automatically exit the timing function.
Connecting the remote control
• A n
ew remote control has to establish a new connection to the cooker hood
when used for first time. One remote control could possibly control several
cooker hood at the same time.
Connection process between remote control and cooker hood
• Within 15S after the cooker hood
connects to the power supply, long press
for 5 seconds, the indicators light begin flashing from one button to
another ,the cooker hood is in connection mode, press any button on remote
control to confirm the connection. The connection process finished and the
remote control can be used for speed selection, lighting and timer setting.
• If you want to connect again, you will need to clear the code that has been set
up previously.
• To clear the code, press for 5 seconds, the indicators light begin flashing from
one button to another, the cooker is in connection mode. Then, press again
for 5 seconds, the previous connection code is cleared.
• When the previous code has been cleared, the
cooker hood back to standby
mode, press for 5 seconds, the indicate light flashing from one button to
another ,the cooker hood is in connection mode, then, press any button on
remote control to confirm the connection.
Loading ...
Loading ...
Loading ...