Loading ...
Loading ...
Loading ...
11
1. B
efore installing or replacing the carbon filters, disconnect the mains power
to the unit.
2. Press the filter lock and remove the mesh filter.
3. Turn the carbon filter on both sides of the motor anti-clockwise. Replace the
carbon filters with the new carbon filters.
4. Place the mesh filter.
5. Connect the power supply to the wall socket.
NOTE:
• Make sure the filter is s
ecurely locked. Otherwise, it would loosen and cause
danger.
• When activated carbon filter attached, the suction power will be lowered.
BULB REPLACEMENT
Important
• Always switch of
f the electricity supply before
carrying out any operations on the appliance.
When handling bulb, make sure it has completely
cooled down before any direct contact with hands.
• When handling bulbs hold with a cloth or gloves to
ensure perspiration does not come in contact with
the bulb as this can reduce the life of the bulb.
Note:
• B
efore changing the lights, make sure that the appliance is turned off and
unplugged.
• Protect against danger when changing lights, such as wearing gloves.
Changing t
he lights:
• Rem
ove the grease filter.
• Use a tool or the hand to press the spring splinter of both sides of LED light to the
inside, until the light is pressed out, see pic 1. Then slightly pull the light connecting
wire out, and dismantle the terminal of the light connecting wire. See pic 2.
• Apply the reverse procedure to install the light back.
ILCOS D c
ode for this lamp is: DSR-1.5/65-S-64
• LED modules – r
ound lamp
• Max wattage: 2×1.5 W
• Voltage range: DC 12V
• Dimensions:
Loading ...
Loading ...
Loading ...