Tripp Lite B132-100A-WP-1 Owner's Manual

Owner's Manual - Page 21

For B132-100A-WP-1. Also, The document are for others Tripp Lite models: B130-101, B130-101A, B130-101-WP-1, B130-101A-WP-1, B130-101S, B130-111, B130-111A, B130-101-U, B132-002-1, B132-002A, B132-004-1, B132-004A, B132-100-1, B132-100A, B132-100-WP-1, B132-110, B132-110A

Loading ...

Installation continued

If you are not connecting any additional remote/repeater units, proceed to

step 12.

UsingCat5e/6cable,connecttheRJ45OUTPUT port on the ﬁrst remote/

repeaterunittotheRJ45INPUT port on a second remote/repeater unit.

Note: If starting with a B130-101 or B130-101A, a remote/repeater unit

(B132-110 or B132-110A) must be added in between the local and remote units

that come with the kit.

Ontheremote/repeaterunityoujustadded,connectamonitorand

speakers* to the OUTPUT port(s) using a VGA Video and Audio* cable.

Connect the external power supply to the remote/repeater unit, and then

plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or

Uninterruptible Power Supply (UPS). The Red power LED and the Green

RJ45LEDsilluminatetoindicatetheunitisreceivingpower.

Repeat steps 8 through 10 for each additional unit you are connecting,

with no more than 4 in a chain. The last remote unit in an extender/

repeater installation should be a standard B132-100-1, B132-100-

WP-1, B132-100A or B132-100A-WP-1 receiver. When starting with a

B130-101 or B130-101A kit, the included remote receiver can be the

last unit in the chain.

Turn on the power to the connected monitors and speakers.*

TurnonthepowertotheVGAVideoandAudio*source.TheOrangeRJ45

LEDs will illuminate to indicate that the units are receiving a signal from

the source.

Ifnecessary,usetheincludedscrewdrivertoadjusttheEqualizationand

Gain settings on the remote/repeater units to improve the video image.

*If this is a feature of your extender kit.

14-01-055 933064.indd 21 1/9/2014 2:36:14 PM

Loading ...

Tripp Lite B132-100A-WP-1 VGA over Cat5/6 Extender, Wall Plate Receiver

Owner's Manual - Page 21