1. Home
  2. Tripp Lite
  3. Tripp Lite B132-100A-WP-1 User Manual
  4. Page 20

Tripp Lite B132-100A-WP-1 VGA over Cat5/6 Extender, Wall Plate Receiver

Owner's Manual - Page 20

For B132-100A-WP-1. Also, The document are for others Tripp Lite models: B130-101, B130-101A, B130-101-WP-1, B130-101A-WP-1, B130-101S, B130-111, B130-111A, B130-101-U, B132-002-1, B132-002A, B132-004-1, B132-004A, B132-100-1, B132-100A, B132-100-WP-1, B132-110, B132-110A

PDF File Manual, 28 pages, Read Online | Download pdf file

B132-100A-WP-1 photo
Loading ...
Loading ...
Loading ...
20
Installation continued
4. To achieve maximum distance and performance, 24Awg solid wire Cat5e/6 cable
must be used. The use of stranded wire Cat5e/6 cable, or cable with a gauge (AWG)
size higher than 24Awg, will result in shorter extension distance. All Tripp Lite N202-
Series cables are made with 24Awg solid wire cabling. Tripp Lite N022-01K-GY
(Cat5e) and N222-01K-GY (Cat6) are 24Awg solid wire bulk cables. For optimal
image quality between 500 and 1,000 ft., use Zero-Skew cable, such as Tripp Lite
P524-01K.
5. To achieve maximum distance and performance, it is recommended that you use
Tripp Lite P502-Seriess VGA Video or P504-Series VGA + Audio cables with RGB
coax.
6. Test to make sure the entire installation works properly before pulling cables through
ceilings/walls.
1
Make sure that the VGA Video and Audio* source is powered off.
2
Connect the VGA Video and Audio* source to the INPUT port(s) on the
local unit using a VGA and Audio* cable.
3
(Optional) –Connectalocalmonitorandspeakers*totheLOCAL port(s)
on the local unit using a VGA Video and Audio* cable.
4
Connect the external power supply to the local unit, and then plug it
into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or
Uninterruptible Power Supply (UPS). The Red power LED and the Green
RJ45LEDwillilluminatetoindicatetheunitisreceivingpower.
5
UsingCat5e/6cable,connecttheRJ45OUTPUT port on the local unit to
theRJ45INPUT port on the remote/repeater unit.
Note: If starting with a B130-101 or B130-101A, a remote/repeater unit
(B132-110 or B132-110A) must be added in between the local and remote units
that come with the kit.
6
Connect a monitor and speakers* to the OUTPUT port(s) on the remote/
repeater unit using a VGA Video and Audio* cable.
7
Connect the external power supply to the remote/repeater unit, and then
plug it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU) or
Uninterruptible Power Supply (UPS). The Red power LED and the Green
RJ45LEDsilluminatetoindicatetheunitisreceivingpower.
*If this is a feature of your extender kit.
14-01-055 933064.indd 20 1/9/2014 2:36:14 PM
Loading ...
Loading ...
Loading ...