Tripp Lite B132-100A-WP-1 Owner's Manual

Owner's Manual - Page 14

For B132-100A-WP-1. Also, The document are for others Tripp Lite models: B130-101, B130-101A, B130-101-WP-1, B130-101A-WP-1, B130-101S, B130-111, B130-111A, B130-101-U, B132-002-1, B132-002A, B132-004-1, B132-004A, B132-100-1, B132-100A, B132-100-WP-1, B132-110, B132-110A

Loading ...

Installation continued

Connect a monitor and speakers* to the OUTPUT ports on the remote

unit using a VGA and Audio* cable.

(B130-101S only) – Connect the included 3.5mm Male to DB9 Male

adapter cable to the 3.5mm OUTPUT port on the remote unit, and

then connect the serial device to the adapter using a DB9 cable.

Connect the external power supply to the remote unit, and then plug

it into a Tripp Lite Surge Suppressor, Power Distribution Unit (PDU)

or Uninterruptible Power Supply (UPS). The B130-101-U gets power

fromtheUSBcablebuilt-intothelocalunit,anddoesn’trequire

external power supplies.

Turn on the power to the monitor, speakers* and RS232 serial

device.*

Turn on the power to the monitor, audio* and RS232 serial* source.

Ifnecessary,adjusttheEqualization and Gain controls using the

included screwdriver to improve the video image.

14-01-055 933064.indd 14 1/9/2014 2:36:13 PM

Loading ...

Tripp Lite B132-100A-WP-1 VGA over Cat5/6 Extender, Wall Plate Receiver

Owner's Manual - Page 14